Hi,
I see that CosmosEx works with network smb shares only if SMB support level 1!
Is it possible to setup CosmosEx to support SMB2 or SMB3?
Thanks!
CosmosEx and SMB version (SMB1 only)
Moderators: Jookie, Moderator Team
-
calimero
- Fuji Shaped Bastard
- Posts: 2624
- Joined: Thu Sep 15, 2005 10:01 am
- Location: Serbia
- Contact:
CosmosEx and SMB version (SMB1 only)
using Atari since 1986. ・ http://wet.atari.org ・ http://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X
Re: CosmosEx and SMB version (SMB1 only)
Hi calimero,
May be it can solve your issue:
https://www.atari-forum.com/viewtopic.p ... 2&start=25
See last post from GoldenGrahams
Cheers
May be it can solve your issue:
https://www.atari-forum.com/viewtopic.p ... 2&start=25
See last post from GoldenGrahams
Cheers
-
calimero
- Fuji Shaped Bastard
- Posts: 2624
- Joined: Thu Sep 15, 2005 10:01 am
- Location: Serbia
- Contact:
Re: CosmosEx and SMB version (SMB1 only)
Thanks!
Mounting share over SMB2 is working now!
Just added in CosmosEx config tool > Shared drive >
Username : [AtariUser,vers=2.0]
Mounting share over SMB2 is working now!
Just added in CosmosEx config tool > Shared drive >
Username : [AtariUser,vers=2.0]
using Atari since 1986. ・ http://wet.atari.org ・ http://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X