Finally got around to cracking open my SCP as I had some disks to image. Installed the sw and drivers, hooked it all up and attempted to copy from the drive to a disk image. I always end up with a 42Kb SCP file regardless of what disk I use.
What's up with it?
Please be advised that access to Atari Forum this coming Friday will be sporadic whilst the backend operating system and dependency upgrades are carried out.
Is my SCP faulty?
Moderators: DrCoolZic, Moderator Team
-
Dal
- Administrator
- Posts: 4232
- Joined: Mon Feb 20, 2006 9:00 pm
- Location: Cheltenham, UK
Is my SCP faulty?
STE: Desktopper case, IDE interface, UltraSatan (8GB + 512Mb) + HXC floppy emulator. Plus some STE's/STFM's
-
JimDrew
- Atari Super Hero
- Posts: 865
- Joined: Mon Nov 04, 2013 5:23 pm
Re: Is my SCP faulty?
Sounds like the disk drive might have a problem. What type of drive?
I am the flux ninja
-
Dal
- Administrator
- Posts: 4232
- Joined: Mon Feb 20, 2006 9:00 pm
- Location: Cheltenham, UK
Re: Is my SCP faulty?
Thanks for the response, Jim. It's a brand new drive supplied with my Kryoflux.
Model is Sony MFP920
Model is Sony MFP920
STE: Desktopper case, IDE interface, UltraSatan (8GB + 512Mb) + HXC floppy emulator. Plus some STE's/STFM's
-
JimDrew
- Atari Super Hero
- Posts: 865
- Joined: Mon Nov 04, 2013 5:23 pm
Re: Is my SCP faulty?
Send me the .scp file (data at cbmstuff.com) and I can look at it, but it sounds like the drive is not sending any data. It could be due to bad power. How are you powering the drive? Do you know if the cable and drive works with your Kryoflux?
I am the flux ninja
-
TheNameOfTheGame
- Fuji Shaped Bastard
- Posts: 2612
- Joined: Mon Jul 23, 2012 8:57 pm
- Location: Almost Heaven, West Virginia
Re: Is my SCP faulty?
Dal did you get this working?
-
Dal
- Administrator
- Posts: 4232
- Joined: Mon Feb 20, 2006 9:00 pm
- Location: Cheltenham, UK
Re: Is my SCP faulty?
Yes - it was the drive in the end.
STE: Desktopper case, IDE interface, UltraSatan (8GB + 512Mb) + HXC floppy emulator. Plus some STE's/STFM's