VT100 cartridge dump?

All about the serious stuff.

Moderators: Mug UK, Zorro 2, Moderator Team

Post Reply
czietz
Hardware Guru
Hardware Guru
Posts: 1539
Joined: Tue May 24, 2016 6:47 pm

VT100 cartridge dump?

Post by czietz »

Does someone have a dump of the VT100 (terminal emulator) cartridge that exists for the Atari ST? Yes, I know that probably any other terminal program is better that this; but still, it would enable me to use a system without any disk drives attached as terminal.
User avatar
marcello
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 130
Joined: Thu May 03, 2012 9:23 pm

Re: VT100 cartridge dump?

Post by marcello »

I have the cartridge, how to proceed with the dump ?
STMint, try Unix on your 68000 Atari http://subsole.org/st_mint
beel1
Atari User
Atari User
Posts: 39
Joined: Sat Oct 31, 2015 10:53 pm

Re: VT100 cartridge dump?

Post by beel1 »

Using CART_IMG.PRG from Steem SSE if you can reach the desktop with the cartridge plugged in?
User avatar
crashman
Captain Atari
Captain Atari
Posts: 217
Joined: Sat May 29, 2010 2:23 am
Location: Vilanova i la Geltrú - Barcelona
Contact:

Re: VT100 cartridge dump?

Post by crashman »

Here you have it!
Atari VT100.jpg
You do not have the required permissions to view the files attached to this post.
260ST, 520ST, 520ST+, 520STFM, 1040STE, 4160STE, STACY 2, MEGA ST2, MEGA ST4, MEGA STE, TT030, FALCON030, FALCON030 with Centurbo 2rB, Firebee
SH204, Megafile 30, Megafile 60, Megafile 44
SM124, SM125, SM146, SC1224, SC1435
Satandisk, Ultrasatan, HxC SD, Hxc SD Slim, NetUSBee, CosmosEX, Gotek HxC, MicroCosmos
2600VCS, LYNX, LYNX II, JAGUAR
czietz
Hardware Guru
Hardware Guru
Posts: 1539
Joined: Tue May 24, 2016 6:47 pm

Re: VT100 cartridge dump?

Post by czietz »

Thank you very much!
czietz
Hardware Guru
Hardware Guru
Posts: 1539
Joined: Tue May 24, 2016 6:47 pm

Re: VT100 cartridge dump?

Post by czietz »

PS: Atari tried to make this similar to the VT100 terminal, which makes it a bit unintuitive to setup. It helps to have the DEC VT100 user manual http://bitsavers.informatik.uni-stuttga ... _Jan79.pdf and to know that the "Help" key on the Atari corresponds to the "Setup" key. For example, to change the baud rate, press "Help" to enter setup mode, press "5" to go to the "SETUP B" screen, then repeatedly press "8" to cycle through baud rates. Press "Help" again to exit setup mode.
schlika
Atarian
Atarian
Posts: 1
Joined: Tue Sep 08, 2020 7:32 pm

Re: VT100 cartridge dump?

Post by schlika »

I am currently testing that same cartridge, but cannot find the documentation, does somebody have a scan ? Still previous post is really helpful, thanks a lot !
Post Reply

Return to “Applications”