Power Switch used on MiST FPGA Help

Moderators: Mug UK, Zorro 2, spiny, Greenious, Moderator Team

Post Reply
User avatar
Mindthreat
Captain Atari
Captain Atari
Posts: 248
Joined: Tue Dec 16, 2014 4:39 am
Contact:

Power Switch used on MiST FPGA Help

Post by Mindthreat »

Hi,

:)

Could someone please provide details in regards to the switch used on the MiST board? I'm designing a custom enclosure but need to route and wire up to an external switch that needs to match that of the board so that it functions accordingly.

It's the last bit of info I need to finish this custom enclosure off once and for all. Any details would be greatly appreciated!
:cheers:
"My attempt at trying to create cool things for the Atari Jaguar:" - http://www.RISCGames.com
Check out my Atari-related YouTube Videos Here: - https://www.youtube.com/channel/UCh7vFY ... VqA/videos
Follow me on Twitter for some Atari ramblings and such: https://twitter.com/mindthreat
slingshot
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2256
Joined: Mon Aug 06, 2018 3:05 pm

Re: Power Switch used on MiST FPGA Help

Post by slingshot »

Mindthreat wrote: Could someone please provide details in regards to the switch used on the MiST board? I'm designing a custom enclosure but need to route and wire up to an external switch that needs to match that of the board so that it functions accordingly.

It's the last bit of info I need to finish this custom enclosure off once and for all. Any details would be greatly appreciated!
:cheers:
What details do you need? It just opens or closes two pins. Here's the schematics:
https://github.com/mist-devel/mist-board/wiki/Board13
Post Reply

Return to “FPGA Chat”