Search found 232 matches

by RealLarry
Fri Apr 01, 2022 6:53 am
Forum: Applications
Topic: Microware OS-9 O/S for Atari ST
Replies: 47
Views: 23258

Re: Microware OS-9 O/S for Atari ST

By attaching OS9Image.img (from a post above) as ACSI device 0, using BOOTOSK.PRG (from your previous post), and then - when prompted - inserting the OS9 boot floppy converted into a format actually suitable for Hatari (attached), I get to this: grab0002.png Very interesting...thank you for the ima...
by RealLarry
Fri Apr 01, 2022 5:08 am
Forum: Applications
Topic: Microware OS-9 O/S for Atari ST
Replies: 47
Views: 23258

Re: Microware OS-9 O/S for Atari ST

Using your boot floppy gives the same results as if I try to boot from the HD image. If I insert the Cumana OSK disk 1 at the prompt request, I get a different error though "Boot failed, error status $00F7". Can confirm that. I imaged my working setup of an OS-9 (STE with a Gotek/FlashFlo...
by RealLarry
Thu Mar 31, 2022 2:45 pm
Forum: Applications
Topic: Microware OS-9 O/S for Atari ST
Replies: 47
Views: 23258

Re: Microware OS-9 O/S for Atari ST

I downloaded the zip file, but I can't get it working under Hatari. It stops after the OS-9/68K System Bootstrap message, with an error "Boot failed, error status $00F6" (this happens both if I attempt to boot from the HD, or the floppy image.) I am using an Atari ST, 1Mb, TOS 1.04 config...
by RealLarry
Wed Mar 16, 2022 2:28 pm
Forum: MiST
Topic: [System 16 Core]
Replies: 7
Views: 455

Re: [System 16 Core]

DanyPPC wrote: Wed Mar 16, 2022 2:18 pm Thanks RealLarry, it seems a very good solution, even if it costs.
You're welcome. That was my thought also: If'm able to pay ~€200 for a MiST and a handful of bucks for a used but good old MultiSync, I' should still be able to buy a needful stand (which will be still useful in some decades) :)
by RealLarry
Wed Mar 16, 2022 1:14 pm
Forum: MiST
Topic: [System 16 Core]
Replies: 7
Views: 455

Re: [System 16 Core]

I understand, so there is no hope of being able to play these games on MIST unless you find a monitor that also spins counterclockwise. If you're having an adequate Monitor (ie MultiSync) which has a VESA mount option, you should consider buying a monitor stand which has a pivot function for 180^. ...
by RealLarry
Mon Mar 14, 2022 11:16 am
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

A little question: is it possible to have a different organization for the SD Card ? For example, I would like to have the following folders: Arcade Computer Console Tools The problem is that I can already create these folders and insert the respective cores, but if from the menu of each single cor...
by RealLarry
Wed Mar 09, 2022 10:04 am
Forum: For sale / Wanted
Topic: New Atari ST/E Mega ST/E hard disk interface - Faster and more SD card compatible than SatanDisk
Replies: 401
Views: 44536

Re: New Atari ST/E Mega ST/E hard disk interface - Faster and more SD card compatible than SatanDisk

troed wrote: Wed Mar 09, 2022 9:59 amI have been in contact with Uwe, but since his test suite is showing the device is not following the standard I think the first order of action will be to fix the issues in upstream ACSI2STM: https://github.com/retro16/acsi2stm/issues/22
I see, thanks for the links. Will have an eye on this...
by RealLarry
Wed Mar 09, 2022 9:44 am
Forum: For sale / Wanted
Topic: New Atari ST/E Mega ST/E hard disk interface - Faster and more SD card compatible than SatanDisk
Replies: 401
Views: 44536

Re: New Atari ST/E Mega ST/E hard disk interface - Faster and more SD card compatible than SatanDisk

Alright, next issue ;) (Is there another support thread?) I'm trying to install HDDriver 11*. However, as soon as I reset or power cycle HDDriver no longer finds any devices. This STE has the "proper" DMA chip upgrade from Atari and works well with other ACSI devices so I don't think it's...
by RealLarry
Sun Feb 27, 2022 4:08 pm
Forum: Hatari
Topic: Hatari 2.3.1 has been released
Replies: 22
Views: 7475

Re: Hatari 2.3.1 has been released

I am building Hatari 2.3.1 on linux. After running cmake it reports that capsimage v5 not found. Is capsimage library v5 for linux available anywhere? I went to http://www.softpres.org/download but the only v5 libraries were for Windows. Yes, there is. I've maintained capsimage (v5) for ArchLinux i...
by RealLarry
Fri Feb 25, 2022 6:17 am
Forum: CosmosEx
Topic: CosmosEX 3.0
Replies: 249
Views: 148141

Re: CosmosEX 3.0

Rightyright! Just finished the CosmosEx Debian Buster image. Anybody interested in can grab it here: https://drive.google.com/drive/folders/1Zoar6Ila8Zd7VdtHMVoulwGc-dPTDFDG Very nice. Installed it a few days ago and it worked perfectly. Thanks! Glad that it's still useful for someone. I should con...
by RealLarry
Sat Jan 15, 2022 10:15 am
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

Attached are two logs from the now non-working 16GB SHDC. One log ist with mist.ini, the other one without . core.rbf is Sorgelig's menu core. I'm leaving the cabled setup as it is, just in case you need more/other logs with different configurations, cards etc. Going well until this INI_PARSER : li...
by RealLarry
Sat Jan 15, 2022 7:10 am
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

Any way to create logs except of the usb2Serial method I have to build first ? (https://github.com/mist-devel/mist-board/wiki/Usb2Serial) Will a ft232 (or a similar device) also work? Any USB-serial converter should work, just beware of the logic levels (3.3V). Attached are two logs from the now no...
by RealLarry
Fri Jan 14, 2022 2:48 pm
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

Ah, great to know. That's what I thought while viewing the mentioned circuit. Will do some logs then, as soon as I can find my adaptor - seems like it fell down from desk, catched by th cat to play with it ;) A cat will find it boring very soon, as it doesn't move by itself :) Absolutely correct, b...
by RealLarry
Fri Jan 14, 2022 2:30 pm
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

slingshot wrote: Fri Jan 14, 2022 2:11 pmAny USB-serial converter should work, just beware of the logic levels (3.3V).
Ah, great to know. That's what I thought while viewing the mentioned circuit. Will do some logs then, as soon as I can find my adaptor - seems like it fell down from desk, catched by th cat to play with it ;)
by RealLarry
Fri Jan 14, 2022 1:33 pm
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

slingshot wrote: Fri Jan 14, 2022 11:17 amProduce some debug logs, and it can be checked.
Any way to create logs except of the usb2Serial method I have to build first ? (https://github.com/mist-devel/mist-boar ... Usb2Serial)
Will a ft232 (or a similar device) also work?
by RealLarry
Fri Jan 14, 2022 7:33 am
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

I'm having weird problems with the last firmware updates (220112 and 220112) and my SDHC cards >=16GB. None of them are working correct. core.rbf (menu) seems to boot (menu loads with "snow" but isn't showing any OSD or RBFs and keyboard and controller are disfunctional). Even cards with o...
by RealLarry
Wed Dec 08, 2021 7:17 am
Forum: MIDI Software and Hardware
Topic: Roland MT-32
Replies: 53
Views: 6017

Re: Roland MT-32

The bad news is...(you all were just waiting for that, right?)... :) I still can't get Ultima III or IV to work with MIDI. I changed the settings like was mentioned in a couple of places and videos I found on Youtube but it doesn't seem to make a difference. Anyone actually have the Ultima's workin...
by RealLarry
Sat Nov 06, 2021 4:09 am
Forum: MiST
Topic: MIST bricking after updating to latest firmware
Replies: 61
Views: 5930

Re: MIST bricking after updating to latest firmware

Where I can found ST HD image for mist and how to connect it ? I want to check how the hard disk image will work. Attached is an empty 250MB hard disk image. How to attach it to the MiSTery core see https://github.com/mist-devel/mist-board/wiki/AtariMassStorage Thank you. How to check if it reads w...
by RealLarry
Fri Nov 05, 2021 11:01 am
Forum: MiST
Topic: MIST bricking after updating to latest firmware
Replies: 61
Views: 5930

Re: MIST bricking after updating to latest firmware

prcoder wrote: Fri Nov 05, 2021 9:51 am Where I can found ST HD image for mist and how to connect it ?
I want to check how the hard disk image will work.
Attached is an empty 250MB hard disk image. How to attach it to the MiSTery core see https://github.com/mist-devel/mist-boar ... assStorage
by RealLarry
Fri Sep 17, 2021 7:05 am
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

https://github.com/mist-devel/mist-firmware/blob/test/firmware-test210916.zip Looks like this will become a nice weekend; Just rechecked three times with fw 210911, sometimes one device works, sometimes the other. Updated to Test-210911, rechecked three times again but no more issues detected! :che...
by RealLarry
Fri Sep 17, 2021 6:45 am
Forum: MiST
Topic: MiST core and firmware changelog
Replies: 315
Views: 205819

Re: MiST core and firmware changelog

With 210911 Retroflag gamepad is not recognised immediately, but it works after I press the reset button on Mist. Retro-bit gamepad is not recognised at all. Can you try this? https://github.com/mist-devel/mist-firmware/blob/test/firmware-test210916.zip Maybe this affected me too the day before yes...
by RealLarry
Mon Sep 13, 2021 3:32 pm
Forum: Professionals
Topic: Can anyone 3D print a TT HDD cover for me please. Happy to pay
Replies: 5
Views: 871

Re: Can anyone 3D print a TT HDD cover for me please. Happy to pay

If we can get it in a well known CAD format also it would help. We would all need to split it differently to fit our printers I think. (Ultimaker 2 here - it's just outside of what I can print in one piece) The original author of this case has used Tinkercad https://www.tinkercad.com/things/h6diQsj...
by RealLarry
Sun Sep 12, 2021 2:23 pm
Forum: Professionals
Topic: Can anyone 3D print a TT HDD cover for me please. Happy to pay
Replies: 5
Views: 871

Re: Can anyone 3D print a TT HDD cover for me please. Happy to pay

I've made a HDD cover just some weeks ago. It's based on this https://www.tinkercad.com/things/h6diQsjfi4i cover and modded for a DeLock 91624 CF adaptor and the Lightning addon: https://forum.atari-home.de/index.php/topic,16285.msg257331.html#msg257331 If you need the "original" closed co...
by RealLarry
Thu Sep 09, 2021 2:46 pm
Forum: Games - General
Topic: The Pawn - will it run on STE?
Replies: 9
Views: 2203

Re: The Pawn - will it run on STE?

Just tested my personal copy with Hatari/STE/TOS 2.06 and 1.62 but it is working fine. Image enclosed for testing purposes.
by RealLarry
Mon Aug 30, 2021 7:19 am
Forum: Professionals
Topic: MyAES 0.98
Replies: 55
Views: 8196

Re: MyAES 0.98

I check changed in XaAES log, only recent change is for ET4000 that need not use v_opnwk but rather v_opnvwk because driver already init at start, I don't think it is your case else probably crash before but there is same feature in MyAES for a long time now for ET4000, perhaps just try to add in m...

Go to advanced search