I want to install Easymint 1.90 for FireBee. I tried 2 different CF cards so far ( 8GB Kingston and 32GB Ultra Sandisk ) and have no success. On 32GB Sandisk I tried installation 3 times and 3 times installation gets stuck at the beginning during unzipping phase ( easymint.zip or xaaes.zip ) Searching the forum I found one post ( if I'm not wrong from user Galvez ) who wrote that his installations were also getting stuck during unzipping and changing CF helped. So then I tried 8GB Kingston and its a little bit better, unzipping goes fine and the first phase of installation gets complete so the machine reboots to go into the second phase when the unix stuff is installed. But the reboot does not complete, it hangs during starting MiNT with a mess on the screen ( as seen below )
Those CF cards were prepared in gparted tool as couple of fat16 partitions ( first one around 450MB or 950MB other ones 950MB or 1900MB ) + one big ext2 partition for the rest of CF capacity.
Any clues? Do I have to do anything specific to run Easymint on Firebee or its just unluck that those 2 CF cards are not working properly with FB?
You do not have the required permissions to view the files attached to this post.