Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team
Timnaber wrote:I have the dust cover for a Falcon from Best. Sorry no pics at the moment.
I also have 5 STs (TT030, MSTE, 2 Mega 4s and a 1040STFM) set up on a very long table. I use two bed sheets to cover those. Cool thing about the bed sheets is that they keep dust off of the table too.
ICS wrote:Here are some of my dust covers, protecting my SF314s, my SC1435 and my 520 ST.
The floppy drive ones were hard to find.
Atarieterno wrote:ICS wrote:Here are some of my dust covers, protecting my SF314s, my SC1435 and my 520 ST.
The floppy drive ones were hard to find.
That is nice! Are those of the external floppy drives also original from that time or is it some home made?
Atarieterno wrote:This model is a classic, with its drawings with polygonal shapes I have seen it in many places.
Guardapolvos Atari (poligonal).JPG
ICS wrote:I have that one, use it with my Falcon
Atarieterno wrote:This is a dust cover for Falcon, recently marketed two or three years ago:
Guardapolvo Falcon.jpg
calimero wrote:Atarieterno wrote:This is a dust cover for Falcon, recently marketed two or three years ago:
Guardapolvo Falcon.jpg
Where this can be bought?
Atarieterno wrote:...but with its infamous system of ordering messages it is practically impossible to find that post...
Miguel wrote:The clear plastic ones are kind of nice but just like most dust covers they don't cover devices plugged into the cartridge port such as the Midex or Unitor.
DarkLord wrote:There was a guy over in the 8bit section at Atari Age that had his wife
doing very high quality dust covers. I had one custom made for my STacy
and it rocks...
Atarieterno wrote:
Can you post a picture of your dust cover for STacy?
Atarieterno wrote:Of course there is also a rigid dust cover for the small 260/520 ST.
Guardapolvos 520 ST - 003.jpg
Guardapolvos 520 ST.jpg
mpattonm wrote:Atarieterno wrote:Of course there is also a rigid dust cover for the small 260/520 ST.
Guardapolvos 520 ST - 003.jpg
Guardapolvos 520 ST.jpg
Was it for ST/M only? I would swear I once had one on 1040STFM. You would not know the place to get these, would you?
DarkLord wrote:Here ya go.
Atarieterno wrote:DarkLord wrote:Here ya go.
That is a nice dust cover!, and also with dedication.
Thank you very much for sharing those images.
Users browsing this forum: No registered users and 3 guests