The problem was due to the CPX setting. Somehow in the order I copied things the CPX set the boot to the PCI IDE (I have no drive hooked there). This disabled the Falcon IDE (it was not seen when booting in 060 mode).
The fix was to copy the CPX to a floppy, boot in 060 mode from the floppy (holding alternate key), then save the boot with the Falcon IDE setting. Then switch to 030 mode and copy control.inf from the floppy to drive C root. It took awhile to figure that one out. Now I'll move on to the Ethernet and USB cards. From everything I'm reading on this forum it doesn't look like this is going to be easy!