HDDriver at 060 mode

[Kroll]

Hi,
I would like ask users Atari Falcon with CT6x and external SCSI drives

I have some trouble to save image file on external SCSI HDD in 060 mode (Atari Falcon with CT63). I have very old SCSI disk It is 50 pin Seagete Barracuda 4.3 GB capacity. In 030 mode that is OK on plain TOS or MiNT/Magic.
There is a trouble in 060 mode. When try to save image to file on SCSI disk, after some time I have this in information on the screen Could not write image file (or something similar) on TOS.

On MiNT system I have this information (please look at below)

Save_image_file_on_SCSI.jpg

My basic disk is either an SD / CF card or an external IDE 3.5 inch disk, and I do not have any problem on this disk / card and everything works fine.

What do you think about it, what can be related to this problem, with the speed of the disk?
I ask Uwe but He told me :
"Maybe this is even related to the more general known SCSI/DMA issues with the Falcon, where clock patches may help."

In my falcon I have not clock patch.

[joska]

In my falcon I have not clock patch.

That's why Stop using SCSI or start the long and tedious process of adding a clock patch that works in both 030 and 060 modes.

[paul92706]

Seems like you need clock patch!

[wongck]

I had used external SCSI on my Falcon with CT63, always no problem. Clock patch is on mine.

[stormy]

Kroll I recommend you build the Phantom clock patch as detailed on Mikros clock patch wiki. I was having similar issues to you even with a different clock patch installed. The Phantom one is apparently the best ever made, it also connects to the sdma which most patches don't. I would be happy to help you and share my experiences making it.

[Kroll]

Thank you all !

Could you give me links, because my other Falcon MB I sent to my friend and He could install clock patch, I will use CT60e there.

[stormy]

Hi Kroll,

Here is the link:
https://mikrosk.github.io/clockpatch/
You want to make Variant 2.2 (author: Ctirad Feřtr)

I can attest that this clock patch is exceptional. I needed this once I overclocked the bus in my Falcon, other clock patches weren't good enough.

[Kroll]

mzry:
Thank you very much, very interesting webpage (I did not know it) abolut all clock patch for falcon

[Kroll]

I do not want to start a new thread, and my colleague who repaired me my other falcon mainboard, I will use it with CT60e, He can add such a clock patch (ver. 2.2). I would also like to use it with, for example, Cubase Audio and an external SCSI hard drive.
Does Cubase Audio with patch on 060 work properly?
Is this clock patch (ver 2.2) useful?