Rustynutt wrote:Also, HD Driver has specific settings what to look for. Maybe running HD Driver also in the auto folder for each boot mode. Do you run a dual auto folder boot config?
Kroll wrote:I also thought about this, but I do not know where can I get information on what modifications, I need to do on the Falcon motherboard and CTPCI to use the IDE connector from the CTPCI, such information is not already on the Rodolphe website.
watzl-berg wrote:I think you got me wrong. Both drive are connected. The 1GB Trancend CF-Card on the internal port and a 32GB SD-Card on the CTPCI-IDE. In 030-Mode the Falcon is booting from the CF-Card an does not "see" the SD-card. And in 060-mode the Falcon is booting from the SD-card an does not "see" the CF-card. No need to do anything with the cards. Both stay connected and are both jumped as master, because in either mode there is only one card active. And this is imho exactly how it is supposed to work. I wonder why nobody else seems to have a constellation like that in their Falcon
Users browsing this forum: No registered users and 2 guests