-IO_ACK trigger in edge, not in state (better in some scrolling...)
-WAIT_n generator ignoring M1 while IO_ACK
In OSD :
-CRTC0 or CRTC1, detected as it by WakeUp! demo. CRTC1 by default.
-MEM_wr : quick and slow. quick by default.
quick : Arkanoid II, Prehistoric II. Ecole demo. Pinball Dreams
slow : Saboteur 2. Still Rising demo.
tipsy1973 wrote:Xtro wrote:As far as I remember this core was compatible with 15khz scart, or at least an old version of the core was. In this mode it ran at 50hz as the original Amstrad, if you run it on a VGA monitor it's running too fast at 73hz making some games jerky and unplayable, I think this is the main problem of this core that needs addressing.
Can you remember what version of the core it was so I can have a test?
bernouilli wrote:Nope, it still doesn't work with the scart cable. If your vga monitor support 15khz, it will work on your vga. The trouble is the sync signals that are still separated.
lips2k15 wrote:I have just tried this and no - it still dosnt work in 15khz... it just rolls constantly.
Users browsing this forum: No registered users and 3 guests