
Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team
redhawk668 wrote:Got this off Fleabay
Robson wrote:Hi,
Update of my "old" config. You might notice the extra item on the picture, a converted SF354 with a slot-in DVD burner and there is also a 120GB external 2.5" IDE drive inside to extend the space of my Mediaportal config. Takes 3 USB ports in total.
Enjoy.
gunni wrote:hi all,
I'm struggling to get a keyboard from a STF working with a teensy 2.0
I've read through these pages a dozen times, the teensy has been flashed with the firmware joska posted, the keyboard led is lit but a quick lsusb suggests there is nothing connected to the usb port!
I'm tearing my hair out here... could one of you guys who have this setup working post exactly how you got it to work? I saw a couple of posts where people had been quite descriptive of a problematic setup and then a quick "its working" later with no hint to what had been wrong in the first place. I fear I am suffering the same error!
thanks in advance
joska wrote:karlm wrote:joska wrote:I have made such an adapter. Using a microcontroller like the Atmega is definitely the easy solution. I've made such an adapter using an Atmega168 so I can use a TT keyboard with my TT. PM me if you're interested in details.
I'm assuming that is a typo there joska - i would hope a TT keyboard works with a TT ...You're right, should say "TT keyboard with my Milan".
redhawk668 wrote:I see a silver coloured flea at the side.![]()
Dal wrote:That's a bit naughty! You should send the seller a message?
Robson wrote:I did, he was cool - removed it.
Shredder11 wrote:Haha I did a double take when I first saw this last week!
joska wrote:The floppy LED is available on pin 3 on the keyboard connector, so there is no need to hack the keyboard itself to do this.
Users browsing this forum: No registered users and 6 guests