Page 1 of 1

European Demo (OVR) and HXC.

Posted: Tue Jul 25, 2017 5:40 pm
by francouai
Hi guys!

I'm running across a problem when I'm loading this fantastic demo on my internal Gotek drive using HXC firmware (up to date).
Demo is unable to load correctly. I'm getting a black screen then reset during the boot'up sequence.
I know there is two versions for this demos, one patched and one regular.
I tried many USB stick, FAT 16 or 32 formatted, I used both demo versions and same problem (at least).
Sometime, on a fresh USB stick, I can load and play parts but after 10mns, it starts to reset then crash again.

I have a 520 STE with 4Mg.
Any idea?

Re: European Demo (OVR) and HXC.

Posted: Wed Jul 26, 2017 5:27 am
by Jeff_HxC2001
I bet that this not related to the drive but are you sure that you are up to date ? : ... =33&t=3147

Re: European Demo (OVR) and HXC.

Posted: Thu Jul 27, 2017 6:01 pm
by francouai
I just upgraded my HXC to V30.17.1a.

no change at all.
This demo doesn't works.

anybody here can try?