simonsunnyboy wrote:Today I wanted to add a power lead extension to my SDCard HxC inside the STE to move the device outside of the case.
I first tried with open STE case, connected cabling and the HxC still worked.
I then put the thing together, the leads to the HxC tunneled through the floppy slit and boom ... the HxC somehow did something to my SD card
(Yes I should have removed the card but everything was without power when I put the connectors back.)
I'll have to digup fresh SDHC cards anyway BUT: is there a possibility the HxC got a problem now? [...]
So any ideas and suggestions welcome!
PS: the hxC reports firmware Revision B at boot.
simonsunnyboy wrote:I am totally unable to repair anything with SMD things Is there anyone I can send it for repair?
simonsunnyboy wrote:*EDIT* As a suggestion for future firmware upgrades, why not display "External RAM IC Error" in this case instead of the less correct "No card"?
simonsunnyboy wrote:For a download I would use a shared account, Dropbox or Ubuntu One or something like that...but I still think the image of 1GB card with only 2 images on should compress down to 2 or 3MB at all if the rest is really empty.
Users browsing this forum: No registered users and 2 guests