I would like to know if there is anyone, who lives fairly close to Northern Va., in the USA, who can help me with some Falcon mb work.
According to Czuba, the boot problems I'm having are because of 74f04 chip.
Can anyone actually do this for me, or give me some really good tips on how to do this?
"Follow the fitting instructions !
You have to remove this chip and the wires...and reconnect the 33 ohms SMT (surface Mounting Tech) resistors (furnished in the packet of the CT60 !) on R216, R221 & R222.
After that , you will boot fine !
And solder the 47 ohms resistor on the SDMA CLK as explained on the fitting manual."
Atari Computer Nut
256mb TT Ram, 14mb ST Ram,
4Gig hdd, IDE DVD Drive