insane wrote:The hang-on-boot bug could be triggered if you don't have the videl clock connected to the SV-clock.
(or sth like that - I don't have an SV - that's from memory).
mikro is still torture testing his CT60e-SV combo :)
We're still trying to fix this race condition
EDIT: this bug also depends on the 68060 cpu speed. fun times.
Please read out your ABE+SDR with abesdr.tos BEFORE Flashing a new TOS.
I've had reports of the ABE+SDR IDs being gone after Flashing.
If you have an ID of FFFFFFFF your ABE+SDR ID is not programmed.
This has no negative impact!
mikro wrote:EDIT: now I read the last line about PSU not being able to be switched on for more than one second without anything connected. Well, in that case you are lucky, that must be the PSU's fault for sure
kcr2000 wrote:Just tried another ATX PSU... only a small one (250W):
even more dead than with the other PSU. This time it's not even a second and only the fan spins up very short and no LEDs on the Falcon, when you try to turn it on.
Guess I trashed my CT60e...
No idea what to do now.
kcr2000 wrote:No idea what to do now.
kcr2000 wrote:But just for understanding: you mean besides having the JTAG-cable connected to the 2nd Falcon and the CT60e laying outside there has to be put +5V external power on the pins? Which ones exactly? Does that mean I have to modify the cable?
Users browsing this forum: No registered users and 2 guests