CTPCI and Adaptec SCSI PCI card

[Rustynutt]

Searched forum and didn't find any docs or discussion.
Has it been declared an Adaptec PCI SCSI card works/does not work on CTPCI as they will on an Milan using current version of HD Driver?
Any past thread links or first hand experience would be much appreciated.

[wongck]

Have not heard of this card on a CTPCI before nor any drivers for it.
But then I have been in and out of Atari over the years, so may have missed any posting of it.
May be there is a development beta version (like almost everything else of CT60)

I do have an Adaptec SCSI card somewhere in my man cave.

[Rustynutt]

Have a number of ISA and PCI cards here in the cave. Curious if anyone has tried the setup. Sure if HD Driver can run an IDE drive, a SCSI card will be seen as well. Goal is to test a PCMCIA card, same company that made the SCSI/ethernet box Roger (extendos) wrote drivers for.
Read something about the CT/CTPCI FPGA programming is based on the same standard the Milan PCI/ISA uses. Forget the chip name/number.

All I can do is try, like everyone else

[wongck]

Ok, good luck.
Let's us know the results but my guess is that chances are slim.
May be the older drivers will work.

[AdamK]

I think the best place to get an answer for that is http://hddriver.seimet.de/forum/

[frank.lukas]

For the Milan there was a SymbiosLogic 801 PCI SCSI Card, the Driver source are Online, I think ...

-> https://www.schwingen.org/files/milan/

[Rustynutt]

For the Milan there was a SymbiosLogic 801 PCI SCSI Card, the Driver source are Online, I think ...

-> https://www.schwingen.org/files/milan/

Thanks Frank
Some years back Michael had sent the driver while setting up a Milan.
One time, it was additional software, since he's released the driver for all.

While not a goal, will be interesting to note performance on the CT BUS.

VME adapter arrived in great shape.