I was playing around with the overclocking of my CT60e, and managed to make it crash every time at 100Mhz. Can't seem to find exactly what the "Reset" pins are for this.
I see a set of pins next to the memory close to the memory where the power supply is. Then of course the power/reset sw/led/060/ etc. I'm hoping it's not under the SuperVidel, 'cause that would stink.
Any help, much appreciated. Documentation seems to be all over the place.
Edit: Solved? There appears to be a 'Recovery' spot on the board, but it didn't seem to do anything for me, but since I had to remove the SuperVidel to get to it, it stopped crashing 100% at 100Mhz, and I was able to load up a bare TOS with only the control panel and the ct60conf.cpx and managed to set it back to 66mhz. It was having some weird issues with not loading up MiNT at 80, and I remember someone saying sometimes it's weird and you can up the speed and it'll be more stable... well that didn't work here... NVDI would completely crash.
Atari 8Bits: 800xl, 600xl, XEGS, 800, 130xe, 130xe (VBXE, U1MB, Stereo POKEY)
Atari STs: 1040STf (broken shifter), 1040STe, Mega STe, TT030, Falcon (CT60e, SuperVidel)