What is the best Snapshot for Radeon card

Discuss CT60/CT63, CTPCI, SuperVidel and EtherNAT hardware here.

Moderators: Mug UK, [ProToS], lp, moondog/.tSCc., Moderator Team

ThorstenOtto
Captain Atari
Captain Atari
Posts: 444
Joined: Sun Aug 03, 2014 5:54 pm

Re: What is the best Snapshot for Radeon card

Postby ThorstenOtto » Thu Aug 30, 2018 10:18 am

The tool has been updated, and now also includes support for jpeg output.

User avatar
Kroll
Captain Atari
Captain Atari
Posts: 454
Joined: Fri Mar 09, 2012 10:07 am

Re: What is the best Snapshot for Radeon card

Postby Kroll » Tue Sep 04, 2018 11:26 am

HI,
today I tried to test a new version of your snapit and jpg as output file, but it is not working at all on TT and Falcon 030 and 060 mode with or without Radeon card. Under TOS I've on the screen stabdard error in 060 in 030 three bombs, below you can find error information under MiNT. What is interesting output file has allways 4 kB lenght (4096 bytes) and I see only begging screenshot.

IMG_20180904_115951_resized_20180904_121546606.jpg


If I will have any other comments I will write later
You do not have the required permissions to view the files attached to this post.

ThorstenOtto
Captain Atari
Captain Atari
Posts: 444
Joined: Sun Aug 03, 2014 5:54 pm

Re: What is the best Snapshot for Radeon card

Postby ThorstenOtto » Tue Sep 04, 2018 5:42 pm

Did you also install the new shared libs from the archive? They have changed, too.

User avatar
Kroll
Captain Atari
Captain Atari
Posts: 454
Joined: Fri Mar 09, 2012 10:07 am

Re: What is the best Snapshot for Radeon card

Postby Kroll » Tue Sep 04, 2018 8:42 pm

Yes I copied from this archive from 020 folder JPEG8D.SLB, ZLIB.SLB, and PNGLIB16.SLB to my mint path c:/MINT/SLB.

User avatar
Neurotoxic
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 116
Joined: Thu Apr 20, 2017 9:29 pm
Location: Bremen (Germany)
Contact:

Re: What is the best Snapshot for Radeon card

Postby Neurotoxic » Sat Sep 08, 2018 9:32 am

I tried SnapIt 1.1 today on my Milan040 with MiNT 1.19 and XaAES. I copied the SLB libraries from the 020 folder to my slb folder before. Unfortunately SnapIt 1.1 crashes when saving the snapshot. A file is created but it's incomplete. I'm using a ATI Radeon Card in my Milan running in high color.

You may take a look on the error message and the output jpeg.
You do not have the required permissions to view the files attached to this post.
520 ST(M) (TOS 1.02), Falcon030 (16 MHz, 16 MB RAM, CF-Card, MiNT & MyAES), Milan040 (25 MHz, 48 MB RAM, EasyMiNT 1.90), Firebee, PowerMac G5 Late 2005 (2 x 2,3 GHz, Mac OS 10.5), iMac 4K Late 2015 (intel Core i7 4 x 3,3 GHz, Mac OS 10.11.6), IBM XT SFD (640 KB RAM, DR DOS 6.0), Compaq LTE 5300 (Pentium/133 MHz, DR-DOS 7.03), AT-PC (Cyrix 6x86L/200 MHz, Windows 98 SE/MS-DOS 6.22 & Windows 3.11)

User avatar
Neurotoxic
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 116
Joined: Thu Apr 20, 2017 9:29 pm
Location: Bremen (Germany)
Contact:

Re: What is the best Snapshot for Radeon card

Postby Neurotoxic » Sat Sep 08, 2018 9:50 am

Under Magic Milan 6.1 it crashes, too. But there's no error message. Only the busy bee that's just stays busy. The output is the same. Again an incomplete jpeg. I also tried it with MiNT 1.17.0 and MyAES 0.97 on my Milan040. Than I'm getting the error message "Error writing file". The last combination, I tried was MiNT 1.17.0 and the patched Version of N.AES 2.0. Again SnapIt is crashing with an error message when saving.
520 ST(M) (TOS 1.02), Falcon030 (16 MHz, 16 MB RAM, CF-Card, MiNT & MyAES), Milan040 (25 MHz, 48 MB RAM, EasyMiNT 1.90), Firebee, PowerMac G5 Late 2005 (2 x 2,3 GHz, Mac OS 10.5), iMac 4K Late 2015 (intel Core i7 4 x 3,3 GHz, Mac OS 10.11.6), IBM XT SFD (640 KB RAM, DR DOS 6.0), Compaq LTE 5300 (Pentium/133 MHz, DR-DOS 7.03), AT-PC (Cyrix 6x86L/200 MHz, Windows 98 SE/MS-DOS 6.22 & Windows 3.11)

ThorstenOtto
Captain Atari
Captain Atari
Posts: 444
Joined: Sun Aug 03, 2014 5:54 pm

Re: What is the best Snapshot for Radeon card

Postby ThorstenOtto » Sat Sep 08, 2018 11:54 am

Neurotoxic wrote:Under Magic Milan 6.1 it crashes, too.


Hm, bad. Did you try both program versions? There is a snapit.acc that was compiled by Pure-C, and a snapit.prg that was compiled by gcc. The prg can also be run as accessory. And does the crash happen only with jpeg output, or also with others? The message in your picture reports a strange PC, that may indicate that the stack was smashed somehow.

User avatar
lp
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2368
Joined: Wed Nov 12, 2003 11:09 pm
Location: GFA Headquarters
Contact:

Re: What is the best Snapshot for Radeon card

Postby lp » Sat Sep 08, 2018 2:49 pm

Hi ThorstenOtto,

I gave snapshot v1.1 a try and noticed a minor visual thing. When "output truecolor" is enabled the last two letters remain in the disabled color. Using ARanyM + MiNT + NAES + NVDI on my system. If I click "help" it then redraws itself and looks correct. Probably the bounding box of the object is too small. ;)

Screen Shot 2018-09-08 at 10.40.59 AM.png


I get similiar results as above. It crashes saving JPEG and writes a partial file that is always 4096 bytes:

Code: Select all

[1][pid  40 (snapit): BUS ERROR:|User PC=960D1EDD, Address:|960D1EDD (basepage=1F46000,|text=1F46100, data=1F68634,|bss=1F692A4)][  OK  ]

The ACC version also crashed.
You do not have the required permissions to view the files attached to this post.


Social Media

     

Return to “CT60 / CT63 Area”

Who is online

Users browsing this forum: No registered users and 4 guests