mzry wrote:My Falcon has exxos clock patch installed also so I don't know why this happens.
mzry wrote:Just wondering if anyone else experienced SCSI issues. My zip drive just locks up during data transfer since my ct60e was installed. The drive still works perfectly on other machines though. My Falcon has exxos clock patch installed also so I don't know why this happens.
wongck wrote:Was discussed way back in 2009, so it's nothing new.
Faucon2001 wrote:Obviously, that's what I am looking for to ! Limiting the scope of a problem is the best way to solve it.
Can you please do a test in 2 and 16 colors? It may help to understand if your problem is the same as mine and therefore find a common solution.
Faucon2001 wrote:I will buy the resistor to do Rodolphe SDMA patch first as it is less intrusive and see if it helps
paul92706 wrote:I actually had problems with my SCSI a while back due to bad clock patch, i would revise that patch if it's installed correctly, i suspect that's your problem!
Faucon2001 wrote:paul92706 wrote:I actually had problems with my SCSI a while back due to bad clock patch, i would revise that patch if it's installed correctly, i suspect that's your problem!
Paul, so with the SDMA patch solved your SCSI issue?
I am not talking about sound crackles, I don't have any, but only SCSi corruption in high Rez/ color depth.
Can you copy files from and to SCSI in CT60 mode in 256c and high resolutions?
Which patch have you applied?
All the information I have read so far is very confusing: everybody tells a different story but nobody is able to answer this simple question.
Thanks for your support.
Faucon2001 wrote:Thank you very much Paul, that's the information that I was looking for
I can now warm up my iron.
I'll let you know the result.
Users browsing this forum: No registered users and 1 guest