Discuss CT60/CT63, CTPCI, SuperVidel and EtherNAT hardware here.
Moderators: Mug UK, moondog/.tSCc., [ProToS], lp, Moderator Team
- Atari God
- Posts: 1324
- Joined: Mon Apr 25, 2011 4:28 am
- Location: Orange, CA
joska wrote:Ok, progress! I very carefully removed my beloved Afterburner from my first Falcon and tested the CT there. It boots, but crashes while copying TOS to RAM. I guess mikro is right and that my CL3 RAM is not suitable.
Next step was to debug my other Falcon. Turns out the buffer patch was the problem, there was no clock to the expansion port! No wonder the CT would not boot... I wish I could blame someone else for this but it's entirely my own fault, I did not replace R216 when I removed the BlowUp FX and restored the original Atari clockpatch.
And what's better - one of my CL3 DIMMs are actually working! I see the desktop!
ahh! you must completly restore to original specs!!
Atari Falcon CT60/CTPCI 14MB+ 512mb ATI9250 + NetUSBee
Atari Falcon030 CF 4gb + NetUSBee+ 14MB Ram
Atari TT030 2meg STRAM/16meg TTRAM + Nova Adaptor +Maxtor SCSI HD + DaynaPort Pocket SCSI
- Atari God
- Posts: 1114
- Joined: Sat Sep 10, 2005 11:11 am
- Location: Brisbane, Queensland, Australia
Glad to hear that, Jo! Feeling like this one is unbeatable, isn't it. ;-)
- Captain Atari
- Posts: 295
- Joined: Wed Mar 21, 2012 7:38 am
- Location: Oregon
Return to “CT60 / CT63 Area”
Who is online
Users browsing this forum: No registered users and 2 guests