Cubase Audio CT60/CTPCI Problems

Discuss CT60/CT63, CTPCI, SuperVidel and EtherNAT hardware here.

Moderators: Mug UK, moondog/.tSCc., [ProToS], lp, Moderator Team

Posts: 28
Joined: Tue Dec 15, 2009 7:19 pm

Cubase Audio CT60/CTPCI Problems

Postby DOB » Wed Nov 16, 2016 9:04 am

Hi everyone,

I've been struggling with trying to get CAF to work with my CT60/CTPCI. I have the patched version of CAF running, it loads up and everything seems to function normally except audio. Any audio I load up into a track, plays back with distortion, or it will sound normal, but when I touch something on the screen, I get audio distortion. A digital, almost ring-modulation sound to the audio track. I've used Studio Son to record and playback and it works great. I have the FDI and ADAT interface connected to a digital mixer. I have the Exempt060 in my auto folder and the proper patched mros running.

I'm not sure how to troubleshoot this. Falcon has had all its mods done by czuba and I would assume that if there was a clock issue, Studio Son or Ace Midi would have problems and they don't.

Can someone with a fully functioning CAF on a CT60 with CTPCI step me thru their setup, including what's in the auto folder and CAF configuration?

Any help would be greatly appreciated.


Social Media


Return to “CT60 / CT63 Area”

Who is online

Users browsing this forum: No registered users and 5 guests