alexh wrote:Just as important is which revision 060 you're using. I assume everyone has a Revision 6? 7E14J?
calimero wrote:Darkolord, nice setup
You have at least double sized heatsink
I forgot to mention, and it would be cool to everybody do the same:
My Falcon is in original case.
rian_ata wrote: Everything above 103MHz is unstable.
DarkLord wrote:That "break point" does seem to vary a bit. I can run mine at
100mhz, but as you say, it gets unstable. I get random software
crashes and glitches at that speed. 95mhz hums along rock solid
DarkLord wrote:rian_ata wrote:I've been told it could be memory and other things that determine
the final usable speed, not just the 060 itself.
calimero wrote:@wongck 95MHz in original case and stock heatsink ?!?!! nice!!
wongck wrote:calimero wrote:@wongck 95MHz in original case and stock heatsink ?!?!! nice!!
Isn't it suppose to be like this?
That's the default speed on the CTCM.
When I had my previous CT60 running in a space case with original cooling, I noticed the temperature ran right into the red @>75Mhz (using the CT60 cpx). The CT63 doesn't have the temp sensor, but using an Eiffel would be recommended.
I ended up installing a huge fan over the CPU plus an exhaust fan in the case. After this the temperature monitor stayed in the amber when running at 95Mhz.
CiH wrote:Why, Chris?
I'll need to refer back to the original owner of this first
There's rather a lot of 'stuff' in the case as you can see, so I'd need to get help in sorting space for the SV in there!
Users browsing this forum: No registered users and 9 guests