The last CTPCI CPLD is not 1J but 1K !
Using with SDR7D may cause big problems !!
When I ask to do the 3 CPLD update, this means in the same time !
Rodolphe wrote:By the way, you have to mention the model and date of your HDD (is it a 4500 or 5400 rd/min ?)...
AND it seems you did the tests with CACHE 5s option, not CACHE NORMAL option (I see more speed here on writes !).
wongck wrote:Added a short how-to for firmware update on our AF wiki.
This has information for both CT60 & CTPCI.
rian_ata wrote:in your CTPCI upgrade guide you explicitly state one needs a JTAG parallel cable to be hooked up to a PC with full parallel port. However, there are good USB JTAG cables as well that work without any problem. I use one of those and have updated my CT63 and CTPCI with the use of the XILINX software.
jfl wrote:Do you? I never have. But maybe the previous owner did?wongck wrote:Yes, instructions for that is not too clear. You must solder a resistor to the CT60
jfl wrote:Don't forget that you can update the firmware from the Falcon itself. That's what I do and it works perfectly. No need for a PC and some Windows software.
Users browsing this forum: No registered users and 4 guests