Moderators: Mug UK, Steem Authors, Moderator Team
Steven Seagal wrote:Hi,
Like they say, it works for me.
I know it's no excuse but please fill a report here instead:
viewforum.php?f=112
Zamuel_a wrote:The mouse/joystick port doesn't work properly. The mouse interfere with the signal so in a game that uses the mouseport the player can't be controlled. Then I moved the mouse around the player moves so that interfere. Didn't happen with the older versions.
Steven Seagal wrote:Could you maybe start the boiler, check log options Init and Shutdown, enable TRACE and log to see if Steem boiler reports something strange before it crashes?
Cyprian wrote:yep, I've just downloaded R556 and Steem.SSE.3.9.1.Win64.DD shows me:
Steem_issue_20170218.png
Below scaling from R556 Boiler
"Treble size"
Steem_3_20170218.png
"Quadruple size"
Steem_4_20170218.png
Steven Seagal wrote:The good news about the bad news is that it's easy to fix.
Just wonder if I should. If you accelerate the CPU on an ST, doesn't the PSG accelerate too?
Steven Seagal wrote:The good news about the bad news is that it's easy to fix.
Just wonder if I should. If you accelerate the CPU on an ST, doesn't the PSG accelerate too?
npomarede wrote:Steven Seagal wrote:The good news about the bad news is that it's easy to fix.
Just wonder if I should. If you accelerate the CPU on an ST, doesn't the PSG accelerate too?
Not that I know ; the CPU has 8 MHz from a base 32 MHz clock and the PSG has 2 MHz from this same 32 MHz clock, so speeding up the cpu clock should not impact the PSG clock (same as it should not impact the 8 MHz FDC clock, else it would not be able to decode MFM).
In the case of the mega STE, you could also switch cpu to 16 MHz, but all other components kept their clocks (MFP, PSG, FDC, ...), so you get faster cpu, but sound is still OK.
Nicolas
npomarede wrote:Steven Seagal wrote:The good news about the bad news is that it's easy to fix.
Just wonder if I should. If you accelerate the CPU on an ST, doesn't the PSG accelerate too?
Not that I know ; the CPU has 8 MHz from a base 32 MHz clock and the PSG has 2 MHz from this same 32 MHz clock, so speeding up the cpu clock should not impact the PSG clock (same as it should not impact the 8 MHz FDC clock, else it would not be able to decode MFM).
In the case of the mega STE, you could also switch cpu to 16 MHz, but all other components kept their clocks (MFP, PSG, FDC, ...), so you get faster cpu, but sound is still OK.
Users browsing this forum: No registered users and 1 guest