ICS wrote:I'm quite sure I still have those.
I had a NOVA VME gfx card in my TT back in the day, and thus the serial port plate was hanging down somewhere behind the machine and was not mounted. Where are you located, in terms of shipping fees and things?
I hate to rain on Chandlers parade but are you sure you needed to remove those blocks to fit a NOVA graphics card back in the day?
I had my TT stripped down to take the main board out the other day and those mounting blocks remain in situ even if you remove the serial plate or other VME card ( I have Matrix coCo in there). They are captive behind the VME slot and are bolted into the chassis using four screws. The only reason to remove them is if you are completely removing the VME guide slot metalwork. I can't imagine you needed to do that to fit the Nova card.
Maybe you did though so I'll shut up now.
TT030 10mb/16mb/1Gb, Coco. Falcon 030 Stock 14mb (Lynxman), 1Gb CF. Falcon 030 Stock 14mb (Atari) 170mb IDE. Mega 1 big button (mash up badged Mega 4) 4mb (home cooked RAM upgrade) ICD ADSpeed ST OverScan. Mega 2 big button (4mb), Mega 1 small button (4mb home cooked 72pin SIMM slot), 520 STe (SIPPs), 520 STFM (4mb using a Falcon 4mb board + Blitter).