Page 1 of 1

Wanted: 3D Printed Gotek Mount for Atari/Amiga

Posted: Tue Sep 25, 2018 5:27 pm
by BaronVonDooM
Im in need of someone with a 3d printer that can print some gotek mounts for me. If you think you can do this for me then please state the price plus p&p. I would like these in white.
Thanks

Atari Gotek mount for an STF (slanted drive)
https://www.thingiverse.com/thing:2674083

Amiga 600 Gotek USB bracket v2 - FlashFloppy OLED
https://www.thingiverse.com/thing:2745095

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Posted: Wed Sep 26, 2018 4:59 am
by DoG
Where are you located in the world?

For the Atari or here.

For the Amiga... I don't know.

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Posted: Wed Sep 26, 2018 8:01 am
by RealLarry
If you're located in Germany I'd get you 15 Euros per print - including shipping and handling.
https://www.thingiverse.com/MakerLarry/designs

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Posted: Wed Sep 26, 2018 2:46 pm
by simonsunnyboy
2 bought from that Ebay seller before they are unavailable again. I guess with these ST specific mounts, no case butchering is necessary to access the display, USB port and buttons?

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Posted: Wed Sep 26, 2018 8:44 pm
by DoG
simonsunnyboy wrote:... I guess with these ST specific mounts, no case butchering is necessary to access the display, USB port and buttons?

No butchering is needed! Rotary encoder also added without touching the sweet old Atari.
2018-09-26 22.36.40 small.jpg

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Posted: Thu Sep 27, 2018 3:48 am
by ranix
man I wish I'd thought of that before I butchered the little button hole in the bottom right. Oh well

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Posted: Tue Oct 09, 2018 8:26 am
by simonsunnyboy
I tried to install my Gotek mount this morning and everything is working fine. Except the screw holes are too small for the normal floppy screws to fit. I cannot put the mounting properly on the distance adaptapers used to hold the old floppy drive.

Which sort of screw is needed to mount these properly inside the ST? And please a clear type name of screw as I have no clue on mechanical parts and have to procure them by clear mechanical specification.