Wanted: 3D Printed Gotek Mount for Atari/Amiga

Do you need some hardware and/or software? Do you want to clear out the attic? Post your classified ads here.

Moderators: Mug UK, Adrenalin, Moderator Team

User avatar
BaronVonDooM
Atarian
Atarian
Posts: 1
Joined: Tue Sep 25, 2018 5:17 pm

Wanted: 3D Printed Gotek Mount for Atari/Amiga

Postby BaronVonDooM » Tue Sep 25, 2018 5:27 pm

Im in need of someone with a 3d printer that can print some gotek mounts for me. If you think you can do this for me then please state the price plus p&p. I would like these in white.
Thanks

Atari Gotek mount for an STF (slanted drive)
https://www.thingiverse.com/thing:2674083

Amiga 600 Gotek USB bracket v2 - FlashFloppy OLED
https://www.thingiverse.com/thing:2745095

DoG
Atari User
Atari User
Posts: 37
Joined: Sun Apr 01, 2018 11:02 pm

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Postby DoG » Wed Sep 26, 2018 4:59 am

Where are you located in the world?

For the Atari or here.

For the Amiga... I don't know.

User avatar
RealLarry
Atari User
Atari User
Posts: 40
Joined: Sat Jan 31, 2015 12:05 pm
Location: San Junipero

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Postby RealLarry » Wed Sep 26, 2018 8:01 am

If you're located in Germany I'd get you 15 Euros per print - including shipping and handling.
https://www.thingiverse.com/MakerLarry/designs
On the other side of the screen, it all looks so easy.

User avatar
simonsunnyboy
Moderator
Moderator
Posts: 5032
Joined: Wed Oct 23, 2002 4:36 pm
Location: Friedrichshafen, Germany
Contact:

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Postby simonsunnyboy » Wed Sep 26, 2018 2:46 pm

2 bought from that Ebay seller before they are unavailable again. I guess with these ST specific mounts, no case butchering is necessary to access the display, USB port and buttons?
Simon Sunnyboy/Paradize - http://paradize.atari.org/

Stay cool, stay Atari!

1x2600jr, 1x1040STFm, 1x1040STE 4MB+TOS2.06+SatanDisk, 1xF030 14MB+FPU+NetUS-Bee

DoG
Atari User
Atari User
Posts: 37
Joined: Sun Apr 01, 2018 11:02 pm

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Postby DoG » Wed Sep 26, 2018 8:44 pm

simonsunnyboy wrote:... I guess with these ST specific mounts, no case butchering is necessary to access the display, USB port and buttons?

No butchering is needed! Rotary encoder also added without touching the sweet old Atari.
2018-09-26 22.36.40 small.jpg
You do not have the required permissions to view the files attached to this post.

ranix
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 105
Joined: Sun Jan 14, 2018 8:01 pm

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Postby ranix » Thu Sep 27, 2018 3:48 am

man I wish I'd thought of that before I butchered the little button hole in the bottom right. Oh well

User avatar
simonsunnyboy
Moderator
Moderator
Posts: 5032
Joined: Wed Oct 23, 2002 4:36 pm
Location: Friedrichshafen, Germany
Contact:

Re: Wanted: 3D Printed Gotek Mount for Atari/Amiga

Postby simonsunnyboy » Tue Oct 09, 2018 8:26 am

I tried to install my Gotek mount this morning and everything is working fine. Except the screw holes are too small for the normal floppy screws to fit. I cannot put the mounting properly on the distance adaptapers used to hold the old floppy drive.

Which sort of screw is needed to mount these properly inside the ST? And please a clear type name of screw as I have no clue on mechanical parts and have to procure them by clear mechanical specification.
Simon Sunnyboy/Paradize - http://paradize.atari.org/

Stay cool, stay Atari!

1x2600jr, 1x1040STFm, 1x1040STE 4MB+TOS2.06+SatanDisk, 1xF030 14MB+FPU+NetUS-Bee


Social Media

     

Return to “For sale / Wanted”

Who is online

Users browsing this forum: No registered users and 3 guests