Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Latest news in the Atari world

Moderators: Mug UK, Silver Surfer, Moderator Team

User avatar
techie_alison
Administrator
Administrator
Posts: 1547
Joined: Tue Aug 23, 2005 10:06 am
Location: Cambridge, UK
Contact:

Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby techie_alison » Mon Feb 08, 2010 5:07 pm

Hi All!! :D

Many apologies for literally disappearing. I've been in London quite a bit lately, and it's really addictive. Regarding the stairs incident, ...it's still not properly sorted, which is annoying me as I want to get back to the gym safely etc. etc.

Right. Time is limited here, as I'm in the throws of trying to get an I.T. job in London (any ideas anyone). I know some of you have been trying to contact me, and I'm going to use this opportunity to focus completely on Atari this week. :cheers:

SO. WHO WANTS WHAT!!??

You have the choice of :
* £12.00 - 2 CHIP TOS - STE VERSIONS >= 1.6 - 32 PIN EPROMS
* £13.00 - ST to SCART
* £14.00 - ST to VGA MALE + 3.5mm STEREO JACK
* £15.00 - 2 CHIP DUAL TOS - WITH SWITCH - STE VERSIONS >= 1.6 - 32 PIN EPROMS
* £20.00 - PeST CABLE
* £20.00 - JeST CABLE
* £26.00 - JeST CONTROLLER
* £28.00 - PeST MOUSE
* £30.00 - 6 CHIP TOS - STFM VERSIONS < 1.6 - 28 PIN EPROMS

All of those are inclusive of postage. And generally when people buy a few bits at once I knock off about 25%, as it's easier for me to little orders done in one go.

Please reply to this thread with what you would like and I'll reply back with what I have. The PeST cables I only have about 1 of, the mouse ones I have about 5. JeST, 2 or 3 controllers, and 2 or 3 cables. Enough for about 10 scart and vga cables. Maybe 3 or 4 STFM 6 chip ones (they're expensive because it's a load of messing about). And about enough to do about 10 STE EPROM sets.

:D

Aly
If I don't answer or appear to have forgotton then email again, I'm scatty! :)

http://www.logicsays.com/ = Updated Site
http://www.logicsays.com/index1 = Older Site (with more Atari)

499
Atari freak
Atari freak
Posts: 71
Joined: Wed Mar 18, 2009 2:25 am
Location: Michigan, USA

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby 499 » Mon Feb 08, 2010 5:20 pm

Hi techie_alison,

I could really use a PeST mouse cable. I am so sick of my original ST mouse. What's the total to ship to the U.S.?

499

User avatar
simonsunnyboy
Moderator
Moderator
Posts: 5167
Joined: Wed Oct 23, 2002 4:36 pm
Location: Friedrichshafen, Germany
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby simonsunnyboy » Mon Feb 08, 2010 6:04 pm

1 JeST cable please - if i understood right this means I can simply plug the PSX pad into that :)
Simon Sunnyboy/Paradize - http://paradize.atari.org/

Stay cool, stay Atari!

1x2600jr, 1x1040STFm, 1x1040STE 4MB+TOS2.06+SatanDisk, 1xF030 14MB+FPU+NetUS-Bee

User avatar
BoNuS
Atari Super Hero
Atari Super Hero
Posts: 766
Joined: Mon Jan 19, 2009 12:45 pm
Location: The Netherlands
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby BoNuS » Mon Feb 08, 2010 6:17 pm

Just wanted to say, Welcome back online :) Good to see you around again...
http://bonus.home.xs4all.nl/
( I have just to much Atari stuff)

User avatar
rocket-dog
Atari Super Hero
Atari Super Hero
Posts: 779
Joined: Wed Mar 05, 2008 3:13 pm
Location: Great Britain - The Kingdom of Mercia

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby rocket-dog » Mon Feb 08, 2010 6:33 pm

Hello Ali!!!!!!!!

Is it true they have electric lights and motor cars in London? Are the streets really made of gold? :D

User avatar
Heavy Stylus
Atari Super Hero
Atari Super Hero
Posts: 776
Joined: Wed Dec 14, 2005 12:59 pm
Location: Exeter, UK
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby Heavy Stylus » Mon Feb 08, 2010 8:04 pm

I was just talking with Tomchi on MSN about you and your absence from the scene this evening! Great to hear from you again. :)

There is a possibility I may need a piece of custom hardware from you soon, a jag/STE Enhanced port adapter -> Sega Genesis/Megadrive pad. Due to the scarcity of Jag pads, and their poor design :P, I'm looking for an adapter that will remap the d-pad, CBA and Option buttons to the Sega d-pad, ABC and Pause buttons.

I'll only need a small quantity (obviously I am aware this will push the cost up a bit) as this is for a project I'm involved with. I'll contact you with full details, but just wanted to know if this is even possible? Has anyone made an adapter for the jag before (so it can use, a genesis/md pad)? With it's primary 4 buttons (ignoring the pause button), i'd imagine it would be an obvious choice considering how cumbersome those old jag controllers are.

Anyway, I hope to talk with you soon,

James.
Last edited by Heavy Stylus on Mon Feb 08, 2010 8:55 pm, edited 1 time in total.
http://www.rgcd.co.uk
The Essential Discmag for Retro Gamers!

http://www.myspace.com/heavystylus
Usual myspace crap.

http://tinyurl.com/heavystylus
Facebook

User avatar
Mug UK
Administrator
Administrator
Posts: 11427
Joined: Thu Apr 29, 2004 7:16 pm
Location: Stockport (UK)
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby Mug UK » Mon Feb 08, 2010 8:43 pm

Stephen Moss was working on a PS1 analogue pad convertor for the Jaguar .. no idea how far he got with making it a reality though.
My main site: http://www.mug-uk.co.uk - slowly digging up the bits from my past (and re-working a few): Atari ST, Sega 8-bit (game hacks) and NDS (Music ripping guide).

I develop a free Word (for Windows) add-in that's available for Word 2007 upwards. It's a fix-it toolbox that will allow power Word users to fix document errors. You can find it at: http://www.mikestoolbox.co.uk

User avatar
1024MAK
Atari Super Hero
Atari Super Hero
Posts: 632
Joined: Sat Aug 01, 2009 2:58 am
Location: Looking forward to summer time in Somerset, UK...

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby 1024MAK » Tue Feb 09, 2010 2:17 am

.
Welcome back Alison! Sounds like you are mobile even if you are not yet 100% online :D


techie_alison wrote:Hi All!! :D

SO. WHO WANTS WHAT!!??

You have the choice of :
* £12.00 - 2 CHIP TOS - STE VERSIONS >= 1.6 - 32 PIN EPROMS
* £13.00 - ST to SCART
* £14.00 - ST to VGA MALE + 3.5mm STEREO JACK
* £15.00 - 2 CHIP DUAL TOS - WITH SWITCH - STE VERSIONS >= 1.6 - 32 PIN EPROMS
* £20.00 - PeST CABLE
* £20.00 - JeST CABLE
* £26.00 - JeST CONTROLLER
* £28.00 - PeST MOUSE
* £30.00 - 6 CHIP TOS - STFM VERSIONS < 1.6 - 28 PIN EPROMS

All of those are inclusive of postage. And generally when people buy a few bits at once I knock off about 25%, as it's easier for me to little orders done in one go.

Please reply to this thread with what you would like and I'll reply back with what I have. The PeST cables I only have about 1 of, the mouse ones I have about 5. JeST, 2 or 3 controllers, and 2 or 3 cables. Enough for about 10 scart and vga cables. Maybe 3 or 4 STFM 6 chip ones (they're expensive because it's a load of messing about). And about enough to do about 10 STE EPROM sets.

:D

Aly


Well, I would like the following please
* ST to SCART quantity = 1
* ST to VGA MALE + 3.5mm STEREO JACK quantity = 1
* PeST CABLE quantity = 1
* JeST CABLE quantity = 1 see note added below at the bottom
* JeST CONTROLLER quantity = 1 see note added below at the bottom
* 6 CHIP TOS - STFM VERSIONS < 1.6 - 28 PIN EPROMS quantity = 1 set

Now I take it that when you say "PeST CABLE" you mean one of your microcontroller's mounted on a PCB complete with a cable?
Same for the JeST CABLE?
And when you say JeST CONTROLLER, I take it you mean the actual hand held game controller?
For the "6 CHIP TOS - STFM VERSIONS < 1.6 - 28 PIN EPROMS" if there is not a preset TOS that you use, please program them with the most stable version that is safe with HDD devices as I wish to use it with one of Jookie & MiKRO's excellent UltraSatan's (it will be replacing a 1.02 TOS).

Thanks for helping us fellow Atarians' :cheers:

Edit:-
NOTE
If the JeST CONTROLLER includes your neat microcontroller circuit then I would not need a JeST CABLE. Or if it is easier for you, supply a JeST CABLE with an unmodified CONTROLLER.

Thanks, Mark :cheers:
Last edited by 1024MAK on Fri Feb 12, 2010 1:25 am, edited 1 time in total.
Falcon, Atari 520ST, 520STFM, 1040STE, Mega, TT and more PC's than I care to count and an assortment of 8 bit micros (nearly forgot the Psion's).
Visit the Atari-Forum Wiki. Lots of technical info at DrCoolZic Atari ST Site :D

User avatar
1024MAK
Atari Super Hero
Atari Super Hero
Posts: 632
Joined: Sat Aug 01, 2009 2:58 am
Location: Looking forward to summer time in Somerset, UK...

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby 1024MAK » Tue Feb 09, 2010 2:20 am

rocket-dog wrote:Hello Ali!!!!!!!!

Is it true they have electric lights and motor cars in London? Are the streets really made of gold? :D


They must have GOLD in London - thats where all those money grabbing MP's gather.... :lol:
Falcon, Atari 520ST, 520STFM, 1040STE, Mega, TT and more PC's than I care to count and an assortment of 8 bit micros (nearly forgot the Psion's).
Visit the Atari-Forum Wiki. Lots of technical info at DrCoolZic Atari ST Site :D

User avatar
DarkLord
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4375
Joined: Mon Aug 16, 2004 12:06 pm
Location: Prestonsburg, KY - USA
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby DarkLord » Tue Feb 09, 2010 7:25 am

Hi Alison! Glad to see you're better. :)

Will this:

* £15.00 - 2 CHIP DUAL TOS - WITH SWITCH - STE VERSIONS >= 1.6 - 32 PIN EPROMS

Work with a STacy? (stock TOS 1.04) If so, I want one please.

Thanks!
Welcome To DarkForce! http://www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS - Telnet:darkforce-bbs.dyndns.org 520

User avatar
rocket-dog
Atari Super Hero
Atari Super Hero
Posts: 779
Joined: Wed Mar 05, 2008 3:13 pm
Location: Great Britain - The Kingdom of Mercia

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby rocket-dog » Tue Feb 09, 2010 3:01 pm

1024MAK wrote:
rocket-dog wrote:Hello Ali!!!!!!!!

Is it true they have electric lights and motor cars in London? Are the streets really made of gold? :D


They must have GOLD in London - thats where all those money grabbing MP's gather.... :lol:


Our MP has just had his house completely refurb'ed.....

User avatar
techie_alison
Administrator
Administrator
Posts: 1547
Joined: Tue Aug 23, 2005 10:06 am
Location: Cambridge, UK
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby techie_alison » Wed Feb 10, 2010 12:24 am

WOW!!! Thanks for the welcome!! :-)

And WOW!! I certainly do have my work cut out for me don't I!! That big one we'll come to a deal on that, as that'd just work out as some daft amount. :P

It's day of the PeSTs today. A total of 12 mice, and 6 cables. Some of those mice belong to Barrie at Keychange, and are being reprogrammed. Sometimes the mouse wasn't initialising properly and it was continually resetting if the voltage wasn't totally spot on, now it's more tolerant. Was in software too.
If I don't answer or appear to have forgotton then email again, I'm scatty! :)

http://www.logicsays.com/ = Updated Site
http://www.logicsays.com/index1 = Older Site (with more Atari)

User avatar
CiH
Atari God
Atari God
Posts: 1136
Joined: Wed Feb 11, 2004 4:34 pm
Location: Middle Earth (Npton) UK
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby CiH » Wed Feb 10, 2010 12:31 am

Hi there, ho there, glad to hear you're well(ish) Hope the icky bits come out okay soon. 8)

This isn't a rush job and can wait a while, but is there a possibility of an STE to scart lead sometime? As distinct from an STFM - Scart lead. (I'm pretty sure that some were made back in the day to support stereo capable tellys and such.)
"Where teh feck is teh Hash key on this Mac?!"

Shredder11
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2434
Joined: Mon Nov 26, 2007 2:23 pm
Location: West Yorkshire, United Kingdom (England)
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby Shredder11 » Wed Feb 10, 2010 1:42 am

Great to see you around again on the forums Aly! Okay here is what I would like...


* £15.00 - 2 CHIP DUAL TOS - WITH SWITCH - STE VERSIONS >= 1.6 - 32 PIN EPROMS = 2 sets

While I am waiting for my Soundpool interfaces to arrive from Germany (two weeks now!) for my Falcon, I will need one or two DSP cables making up (DB26M <-> DB15F).

Something like this:

Image

Oh and if you have any Motorola 68882 FPU co-processor chips I would like one please! :)

User avatar
DrCoolZic
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2237
Joined: Mon Oct 03, 2005 7:03 pm
Location: France
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby DrCoolZic » Wed Feb 10, 2010 7:55 am

techie_alison wrote:* £13.00 - ST to SCART

I need one
* £14.00 - ST to VGA MALE + 3.5mm STEREO JACK

I need one. Do you have it with VGA FEMALE ?
* £15.00 - 2 CHIP DUAL TOS - WITH SWITCH - STE VERSIONS >= 1.6 - 32 PIN EPROMS

What is included? Just the the board with swich or EPROM included? Just bought TOS 2.06 EPROM (27C1001 I think) would that fit into your board?
* £20.00 - JeST CABLE
* £26.00 - JeST CONTROLLER

What is this?

Thanks Jean

User avatar
Heavy Stylus
Atari Super Hero
Atari Super Hero
Posts: 776
Joined: Wed Dec 14, 2005 12:59 pm
Location: Exeter, UK
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby Heavy Stylus » Wed Feb 10, 2010 1:31 pm

JeST is an adapter to let you use a Playstation controller on the ST as a joystick. Amongst other things it has a dual function; the analogue sticks can also be used to emulate the mouse. A great piece of kit ;)

Cable is an adapter lead (you need to buy your own controller), whereas Controller has the interface built into a PS controller already (instant plug and play).
http://www.rgcd.co.uk
The Essential Discmag for Retro Gamers!

http://www.myspace.com/heavystylus
Usual myspace crap.

http://tinyurl.com/heavystylus
Facebook

User avatar
DrCoolZic
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2237
Joined: Mon Oct 03, 2005 7:03 pm
Location: France
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby DrCoolZic » Wed Feb 10, 2010 2:00 pm

Heavy Stylus wrote:JeST is an adapter to let you use a Playstation controller on the ST as a joystick. Amongst other things it has a dual function; the analogue sticks can also be used to emulate the mouse. A great piece of kit ;)

Cable is an adapter lead (you need to buy your own controller), whereas Controller has the interface built into a PS controller already (instant plug and play).


Sounds great. I think I will get one.

Any doc / pictures ? found nothing on "logicsays" ?

Shredder11
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2434
Joined: Mon Nov 26, 2007 2:23 pm
Location: West Yorkshire, United Kingdom (England)
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby Shredder11 » Wed Feb 10, 2010 5:08 pm

Plenty of info in this topic from last year:

http://www.atari-forum.com/viewtopic.php?f=15&t=16066&hilit=JeST

User avatar
1024MAK
Atari Super Hero
Atari Super Hero
Posts: 632
Joined: Sat Aug 01, 2009 2:58 am
Location: Looking forward to summer time in Somerset, UK...

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby 1024MAK » Fri Feb 12, 2010 12:23 am

1024MAK wrote:Well, I would like the following please
* ST to SCART quantity = 1
* ST to VGA MALE + 3.5mm STEREO JACK quantity = 1
* PeST CABLE quantity = 1
* JeST CABLE quantity = 1
* JeST CONTROLLER quantity = 1
* 6 CHIP TOS - STFM VERSIONS < 1.6 - 28 PIN EPROMS quantity = 1 set
Now I take it that when you say "PeST CABLE" you mean one of your microcontroller's mounted on a PCB complete with a cable?
Same for the JeST CABLE?
And when you say JeST CONTROLLER, I take it you mean the actual hand held game controller?
For the "6 CHIP TOS - STFM VERSIONS < 1.6 - 28 PIN EPROMS" if there is not a preset TOS that you use, please program them with the most stable version that is safe with HDD devices as I wish to use it with one of Jookie & MiKRO's excellent UltraSatan's (it will be replacing a 1.02 TOS).
Thanks for helping us fellow Atarians' :cheers:


If the JeST CONTROLLER includes your neat microcontroller circuit then I would not need a JeST CABLE. Or if it is easier for you, supply a JeST CABLE with an unmodified CONTROLLER.

Thanks, Mark :cheers:

User avatar
Awol
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 125
Joined: Sat Feb 16, 2008 6:04 am
Location: USA

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby Awol » Fri Feb 12, 2010 5:16 pm

Shredder11 wrote:Plenty of info in this topic from last year:

http://www.atari-forum.com/viewtopic.php?f=15&t=16066&hilit=JeST

/me reads JeST feature list.
Little confused... Can I use the direction buttons (up/down/left/right) instead of the dual analog sticks with games?
I see it works with the Amiga and C64 too, which is neat, since I've got a C64 and plan on getting an A1200 eventually.
I'm from the NES generation: D-pad + A/B is all I need. I wish there was a NEST! :lol:
I want to try some ST/C64 shmups, but I can't stand joysticks in that type of game.
1040STE: 4MB RAM, TOS 2.06
Formerly Grey_and_Purple.

User avatar
Heavy Stylus
Atari Super Hero
Atari Super Hero
Posts: 776
Joined: Wed Dec 14, 2005 12:59 pm
Location: Exeter, UK
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby Heavy Stylus » Fri Feb 12, 2010 5:57 pm

The d-pad is used as a d-pad.
http://www.rgcd.co.uk
The Essential Discmag for Retro Gamers!

http://www.myspace.com/heavystylus
Usual myspace crap.

http://tinyurl.com/heavystylus
Facebook

User avatar
remowilliams
Captain Atari
Captain Atari
Posts: 246
Joined: Mon Apr 02, 2007 1:49 am

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby remowilliams » Sat Feb 13, 2010 9:51 pm

Hi Aly!

I could definitely go for a PeST cable, 2 JeST cables, and an ST/VGA cable. The VGA cable would actually be preferable with a small (perhaps 6" or less) cord with a female DB15HD, that way I can easily hook it to the M/M VGA cable I have hooked to my beautiful new HD LCD that does low rate RGB :)

User avatar
techie_alison
Administrator
Administrator
Posts: 1547
Joined: Tue Aug 23, 2005 10:06 am
Location: Cambridge, UK
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby techie_alison » Mon Feb 15, 2010 12:41 am

Ok. I'll do a tally in a moment....

* £12.00 - 2 CHIP TOS - STE VERSIONS >= 1.6 - 32 PIN EPROMS
11 * £13.00 - ST to SCART
11 * £14.00 - ST to VGA MALE + 3.5mm STEREO JACK
1 * £14.00 - ST to VGA FEMALE + 3.5mm STEREO JACK
1111 * £15.00 - 2 CHIP DUAL TOS - WITH SWITCH - STE VERSIONS >= 1.6 - 32 PIN EPROMS
111 * £20.00 - PeST CABLE
111 * £20.00 - JeST CABLE
1 * £26.00 - JeST CONTROLLER
* £28.00 - PeST MOUSE
1 * £30.00 - 6 CHIP TOS - STFM VERSIONS < 1.6 - 28 PIN EPROMS
remowilliams wrote:Hi Aly!

I could definitely go for a PeST cable, 2 JeST cables, and an ST/VGA cable. The VGA cable would actually be preferable with a small (perhaps 6" or less) cord with a female DB15HD, that way I can easily hook it to the M/M VGA cable I have hooked to my beautiful new HD LCD that does low rate RGB :)


3.5mm audio on that?

And how long for everyone else? I need lengths!! :P

I think what I'm going to do is to get the PeSTs done first!! As I'm being contacted by via email too. The PeST Mouse ones don't seem to be going so. Really!! They ARE good. PeST has always been developed with these, and they're practically the industry standard mouse. Much like the Nokia 7110 was the plain standard, as was the the IBM model M keyboard heralded the mecca!! :D
If I don't answer or appear to have forgotton then email again, I'm scatty! :)

http://www.logicsays.com/ = Updated Site
http://www.logicsays.com/index1 = Older Site (with more Atari)

User avatar
DarkLord
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4375
Joined: Mon Aug 16, 2004 12:06 pm
Location: Prestonsburg, KY - USA
Contact:

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby DarkLord » Mon Feb 15, 2010 2:14 am

"1111 * £15.00 - 2 CHIP DUAL TOS - WITH SWITCH - STE VERSIONS >= 1.6 - 32 PIN EPROMS"

Er, just to make sure - these do work with TOS 1.4, ST's (including my STacy?), right?

Thanks!
Welcome To DarkForce! http://www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS - Telnet:darkforce-bbs.dyndns.org 520

User avatar
remowilliams
Captain Atari
Captain Atari
Posts: 246
Joined: Mon Apr 02, 2007 1:49 am

Re: Building PeSTs, JeSTs, EPROMs, VGA SCART leads THIS WEEK!!

Postby remowilliams » Mon Feb 15, 2010 6:50 am

techie_alison wrote:3.5mm audio on that?

Yes, 3.5mm F please. :]


Social Media

     

Return to “News & Announcements”

Who is online

Users browsing this forum: No registered users and 6 guests