14mb board (various docs, pinout, ctr14 gerber files)

Hardware, coding, music, graphic and various applications

Moderators: Mug UK, lp, [ProToS], moondog/.tSCc., Moderator Team

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Mon Apr 27, 2009 9:39 pm

Great. If anyone is using this board with any speedups (Skunk, Nemesis, CT,...) please report if it still works or gives some errors.

Faler
Atarian
Atarian
Posts: 5
Joined: Sun Jul 20, 2008 6:39 pm

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby Faler » Tue Apr 28, 2009 9:06 pm

djbase,

I have installed the board in my falcon, its a stock falcon with a 4gb drive in it, connected with the rf to the tv.
I installed some edo ram in it i got from my work, but only the double sided memory seems te work.
When i install the memory and turn on the falcon, it appears as if the screen is getting up to the required framerate, then i have to turn it off and on again and after the same flickering it shows me the atari logo.

As if the memory needs to warm up or something.

50% of the times the falcon gives me 4 bombs (illegal instruction) after a few minutes of operation (there is no difference if im doing something or not, or using the connected hd.)

I am thinking i might have used the wrong kind of ram, do you have advice which kind of 72 pins ram i need to use?

Regards,

Justin

ps.

The original 4mb atari ram works fine.

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Tue Apr 28, 2009 9:46 pm

Don't use EDO Ram. You will need FPM Ram. The one I have has Micron chips MT4C4M4E8DJ with 60ns.

Faler
Atarian
Atarian
Posts: 5
Joined: Sun Jul 20, 2008 6:39 pm

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby Faler » Wed Apr 29, 2009 6:38 am

Is there a difference in using double sided or single sided ram?

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Wed Apr 29, 2009 11:27 am

It should be single sided with 8 chips.

User avatar
Erazotropa
Atari freak
Atari freak
Posts: 72
Joined: Fri Sep 11, 2009 9:37 am
Location: NetherWorld
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby Erazotropa » Tue Oct 20, 2009 5:22 pm

Waiting for my board to arrive from Djbase ;)
Björn - Erazotropa - Eraz

jvernet
Atari freak
Atari freak
Posts: 65
Joined: Wed Sep 12, 2007 8:04 am
Location: France, 77
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby jvernet » Sat Mar 13, 2010 12:47 pm

Hi,

Is there any chance to have another 14Mb card from djbase ?


JV
Atari stuff:
520ST, 520 STF, 520STe, 1040ST, 1040STe, MegaST1, MegaST2, MegaST4, MegaSTe 4Mb+DD 250Mb
Falcon: 14Mb Falcon, SpeedRes 030/40 Card-TT/030: 4MbST+20MbFastRAMTT, DD 1Gb, Hydra NetWork Card
Falcon AB40: AfterBurner 040, Nemesis, dead Blowup Hard II, 32Mb.
--
800XL, 130xe,65xe

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Sat Mar 13, 2010 10:55 pm

It is possible, yes.

jvernet
Atari freak
Atari freak
Posts: 65
Joined: Wed Sep 12, 2007 8:04 am
Location: France, 77
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby jvernet » Sun Mar 14, 2010 2:42 pm

djbase wrote:It is possible, yes.



Nice ! I would like to buy two unit. How can i do that ?

Jerome
Atari stuff:
520ST, 520 STF, 520STe, 1040ST, 1040STe, MegaST1, MegaST2, MegaST4, MegaSTe 4Mb+DD 250Mb
Falcon: 14Mb Falcon, SpeedRes 030/40 Card-TT/030: 4MbST+20MbFastRAMTT, DD 1Gb, Hydra NetWork Card
Falcon AB40: AfterBurner 040, Nemesis, dead Blowup Hard II, 32Mb.
--
800XL, 130xe,65xe

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Sun Mar 14, 2010 5:06 pm

Just drop a PM with your address and you will get a total return. PayPal available.

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Tue Mar 23, 2010 11:11 pm

I picture would be nice as all Falcons I had didn't have a problem here.

User avatar
alexh
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2693
Joined: Wed Oct 20, 2004 1:52 pm
Location: UK - Oxford
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby alexh » Tue Mar 23, 2010 11:29 pm

Sorry for the crap photos.

I am not 100% sure but I think Simbo was referring to a problem I had with all three of the Falcons I've got access to. They all have 90' a step in the shielding which goes above where the SIMM sits.

Image

Here you can see that the shielding cannot be put back on after fitting the SIMM adapter. There is not enough room without the SIMM let alone with it.

Image

Image

I was a little bit disappointed when it did not just fit back together perfectly. However a few minutes with a pair of TIN SNIPS should work. I'll have to do the metal box over the floppy drive too which also does not fit :(

User avatar
wongck
Ultimate Atarian
Ultimate Atarian
Posts: 12420
Joined: Sat May 03, 2008 2:09 pm
Location: Far East
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby wongck » Wed Mar 24, 2010 11:24 am

My falc came with the square metal shielding.
It came off since mid 90s when I got my 14MB memory upgrade.
Not much issues with interference what so ever, even on my monitor (back then).
On the TV, there seems to be some minor diagonal interferences.
My Stuff: FB/Falcon CT63/CTPCI+ATI+RTL8139+USB 512MB 30GB HDD CF HxC_SD/ TT030 68882 4+32MB 520MB Nova/ 520STFM 4MB Tos206 SCSI
Shared SCSI Bus:ScsiLink ethernet, 9GB HDD,SD-reader @ http://phsw.atari.org
My Atari stuff for sale - click here for list

User avatar
alexh
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2693
Joined: Wed Oct 20, 2004 1:52 pm
Location: UK - Oxford
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby alexh » Wed Mar 24, 2010 11:57 am

What did you do with the internal speaker though? Ditch it?

User avatar
wongck
Ultimate Atarian
Ultimate Atarian
Posts: 12420
Joined: Sat May 03, 2008 2:09 pm
Location: Far East
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby wongck » Wed Mar 24, 2010 1:50 pm

alexh wrote:What did you do with the internal speaker though? Ditch it?

Nah, it's there.
Sits between the HDD and FDD cables.
Sometimes I wonder if the magnetic part of the speaker is killing my floppies :roll:
But frankly, I don't get so many bad floppy.
My Stuff: FB/Falcon CT63/CTPCI+ATI+RTL8139+USB 512MB 30GB HDD CF HxC_SD/ TT030 68882 4+32MB 520MB Nova/ 520STFM 4MB Tos206 SCSI
Shared SCSI Bus:ScsiLink ethernet, 9GB HDD,SD-reader @ http://phsw.atari.org
My Atari stuff for sale - click here for list

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Wed Mar 24, 2010 6:47 pm

Yes, that top shield must (or should) be removed. But what other shield is there around? I know only that one in the pictures above.

User avatar
alexh
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2693
Joined: Wed Oct 20, 2004 1:52 pm
Location: UK - Oxford
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby alexh » Wed Mar 24, 2010 7:48 pm

That shield comes in two pieces. The big main one in these photos and an extra rectangular one just a little bit bigger than the floppy disk drive which it covers. The two almost mate up just next to the speaker.

User avatar
wongck
Ultimate Atarian
Ultimate Atarian
Posts: 12420
Joined: Sat May 03, 2008 2:09 pm
Location: Far East
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby wongck » Thu Mar 25, 2010 11:47 am

djbase wrote:Yes, that top shield must (or should) be removed. But what other shield is there around? I know only that one in the pictures above.


It's OK to leave the bottom one as it is.
My Stuff: FB/Falcon CT63/CTPCI+ATI+RTL8139+USB 512MB 30GB HDD CF HxC_SD/ TT030 68882 4+32MB 520MB Nova/ 520STFM 4MB Tos206 SCSI
Shared SCSI Bus:ScsiLink ethernet, 9GB HDD,SD-reader @ http://phsw.atari.org
My Atari stuff for sale - click here for list

User avatar
wongck
Ultimate Atarian
Ultimate Atarian
Posts: 12420
Joined: Sat May 03, 2008 2:09 pm
Location: Far East
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby wongck » Thu Mar 25, 2010 11:49 am

alexh wrote:That shield comes in two pieces. The big main one in these photos and an extra rectangular one just a little bit bigger than the floppy disk drive which it covers. The two almost mate up just next to the speaker.


Oh, on my is a small piece of metal that covers part of the fdd.
That have to come off too as it seems to be mounted on the larger one.
My Stuff: FB/Falcon CT63/CTPCI+ATI+RTL8139+USB 512MB 30GB HDD CF HxC_SD/ TT030 68882 4+32MB 520MB Nova/ 520STFM 4MB Tos206 SCSI
Shared SCSI Bus:ScsiLink ethernet, 9GB HDD,SD-reader @ http://phsw.atari.org
My Atari stuff for sale - click here for list

JLPedro
Atariator
Atariator
Posts: 19
Joined: Sat Apr 03, 2010 11:14 am

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby JLPedro » Mon Apr 05, 2010 12:23 pm

Any chance of getting one card for my soon to arrive Falcon 030 DJbase? I've send you a email. Thanks.

User avatar
djbase
Captain Atari
Captain Atari
Posts: 173
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby djbase » Thu Apr 08, 2010 2:59 pm

Currently all boards are sold. A new batch will be made soon.

User avatar
I_am_I
Retro freak
Retro freak
Posts: 16
Joined: Wed Nov 19, 2008 5:49 pm

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby I_am_I » Wed May 12, 2010 7:13 pm

Hi Djbase,
Couple month ago, i sent to your Paypal acount 20 euros for the 14 mb falcon memory board. Since then, no news. Did you forget me ? :roll:

User avatar
Saturnin51
Captain Atari
Captain Atari
Posts: 158
Joined: Thu Jan 14, 2010 7:59 pm
Location: THIAIS - FRANCE

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby Saturnin51 » Sun Jun 13, 2010 7:28 pm

I am interested by a ram card for my Falcon. Would it be possible and with which delay ?
Falcon 030-14 Mo - FDI Steinberg -Soundpool Analog 8 - SMP24 - Cubase Audio Falcon 2.06 dongle - SC55 - SG64 - Yamaha CBX-T3

User avatar
wongck
Ultimate Atarian
Ultimate Atarian
Posts: 12420
Joined: Sat May 03, 2008 2:09 pm
Location: Far East
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby wongck » Mon Jun 14, 2010 11:34 am

previouly, djbase boards from china
was delayed by some volcanic ash
but that was for hydra
My Stuff: FB/Falcon CT63/CTPCI+ATI+RTL8139+USB 512MB 30GB HDD CF HxC_SD/ TT030 68882 4+32MB 520MB Nova/ 520STFM 4MB Tos206 SCSI
Shared SCSI Bus:ScsiLink ethernet, 9GB HDD,SD-reader @ http://phsw.atari.org
My Atari stuff for sale - click here for list

User avatar
Saturnin51
Captain Atari
Captain Atari
Posts: 158
Joined: Thu Jan 14, 2010 7:59 pm
Location: THIAIS - FRANCE

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Postby Saturnin51 » Thu Jul 01, 2010 4:21 pm

I send a new call to djbase about a 14Mo ram card for my Falcon. Are you still alive :D :D ?
Falcon 030-14 Mo - FDI Steinberg -Soundpool Analog 8 - SMP24 - Cubase Audio Falcon 2.06 dongle - SC55 - SG64 - Yamaha CBX-T3


Social Media

     

Return to “Professionals”

Who is online

Users browsing this forum: No registered users and 4 guests