mzry wrote:I found the answer: I e-mailed Uwe about HD Driver, he sent me version 9.1 as the SCSI wiki only reported compatibility with that version and voila! All working now
Hope this helps anyone else who comes across this issue in the future.
mzry wrote:It was definitely the HD driver version. I tried everything you mentioned before finding the answer. I think my TT has terminators on both ends, on the motherboard and the scsi2sd.
damanloox wrote:first of all - configure just one device (and make the size the largest size of the card you'll use but don't go crazy - 8gb is enough)
scsi ID of the device = 1. Select scsi2, do not select parity or any other stuff.
In HDDrutil - make a few partitions 500MB each. Do not select dos/windows compatibility (you'll have to stick to one 500mb partition if you do).
That should work.
Also - make sure you have terminators on TT motherboard.
wongck wrote:See the scsi2sd product page. It say compatible to hddriver v9.06.
Users browsing this forum: No registered users and 7 guests