Sack AT-Speed 286 emulator - hardware installation guide?

Troubles with your machine? Just want to speak about the latest improvements? This is the place!

Moderators: Mug UK, Zorro 2, spiny, Greenious, Moderator Team

vattari
Atari freak
Atari freak
Posts: 50
Joined: Mon Jan 12, 2015 7:57 pm
Location: Victoria, Australia

Sack AT-Speed 286 emulator - hardware installation guide?

Postby vattari » Fri Jun 15, 2018 1:08 am

I purchased a Mega ST 4 that came with a bonus Sack AT-Speed 286 emulator.
The Mega ST also had a HD FDD and Overscan modification done to it so there was a lot of internal wiring. The computer wouldn't boot until I removed the AT Speed from the Mega ST Bus adapter.
As it turns out the AT Speed board had a wire running from the Mega ST Bus adapter to a parrot clip that wasn't connected.
While I can find the software for the board, I couldn't track down the hardware installation guide for it that could clarify where that wire would go.
Does anyone know where this would go or better yet, have a scan of the installation guide?

TIA,
Paul
2018-06-15 08.45.38-small.jpg


2018-06-15 08.45.27-small.jpg
You do not have the required permissions to view the files attached to this post.
  • Mega STE/4, Monster board, 40GB IDE, CosmosEx
  • Mega ST4, Monster board, 8GB CF, Gotek
  • TT4/16, SCSI2SD
  • Falcon 14MB, 8GB CF, Falcon Speed, CosmosEx
  • Falcon 14MB, 8GB SD, Gotek
  • 130XE/myIDE2; 800XL/Supermon; XEGS/SIO2SD; 800XL/SIO2SD; 130XE/SIDE2
  • 1040STE/4MB, Monster board (8GB SD, RTC)
Work-in-progress: Mega ST4/Matrix M110 video; Mega ST2/Titan Reflex video; TT 2/16MB; 1200XL UAV; 400 UAV/Audio; 800

Social Media

     

Return to “Hardware”

Who is online

Users browsing this forum: GokMasE and 8 guests