Does anyone know the function of the following jumpers inside the Mega STe:
J401 (I haven't been able to find this one in the schematics yet, but it's right next to the floppy drive cable and to the right of the internal ACSI-SCSI host adapter)
I'm asking because I've just received a new 1.44MB Sony MPF-920 floppy drive which I want to try out, but I seem to recall an internal jumper which would allow booting from a "drive 1" instead the more common "Drive 0", so by changing the jumper I could try it out before resoldering the drive 0/1 jumper inside the drive itself. I suspect one of first two jumpers (or a specific combination) will allow that, or are they just for selecting if the boot drive should be an internal or externally attached one?
You do not have the required permissions to view the files attached to this post.
Mega STe | MonSTer (Mega STe) with dual IDE-CF memory card adapter | STe | SM-144 |NEC Multisync 1990SXi | IDE doubler | ST_ESCC | RSVE | ICD Link II | Link '97 | HD floppy drive/AJAX | HD floppy module | Minolta PCMCIA card-drive | Realtime Clock module | Discovery cartridge | Unitor-2 | Export | Combiner | Steady Eye | Human Touch | Unicorn USB