NetUSBee USB drivers download

Troubles with your machine? Just want to speak about the latest improvements? This is the place!

Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team

displaced
Atari freak
Atari freak
Posts: 53
Joined: Sat Aug 06, 2016 7:09 pm

Re: NetUSBee USB drivers download

Postby displaced » Wed Jan 09, 2019 2:07 pm

Perdrix24 wrote:It should work. Try removing accessories. Not likely, but try also usb.prg from the ST folder of the drivers, in case yours is corrupted. They really are the same.


A-ha! It was SERIAL.CPX that was breaking it. Working great now - thanks!

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Wed Jan 09, 2019 4:44 pm

Good! Interesting about SERIAL.CPX. We know there is a conflict between STiNG and the USB drivers, when STiNG is configured to use the NetUSBee ethernet.

mzry
Atari Super Hero
Atari Super Hero
Posts: 581
Joined: Tue Jan 26, 2016 12:39 pm

Re: NetUSBee USB drivers download

Postby mzry » Wed Jan 09, 2019 5:26 pm

Just a heads up to people trying to get this to work! 1. Check the readme to make sure you sort the auto programs in the correct order and 2. flash drive support is VERY picky, I had to try 4 different types of USB stick before it worked, and when taking into account that you have to partition them in Linux to get Fat16 with a maximum partition of 2gb makes for a LOT of trial and error.
Falcon ct60e 060 - 256mb ram - phantom bus and dsp accel // Atari TT - Thunder and Storm IDE 64mb ram - Lightning VME - USB LAN - Ati Mach64 2mb // Atari STM 4160 - 4MB ram - 16Mhz exxos 1.5 booster - Ultrasatan

User avatar
TheNameOfTheGame
Atari God
Atari God
Posts: 1172
Joined: Mon Jul 23, 2012 8:57 pm
Location: Almost Heaven, West Virginia

Re: NetUSBee USB drivers download

Postby TheNameOfTheGame » Wed Jan 09, 2019 8:25 pm

Perdrix24 wrote:The super-latest version of mouse.prg supports the scroll wheel: https://bintray.com/freemint/freemint/d ... sb4tos.zip

But not for all mouse wheels (too long story). Try it and report if it works for you! The wheel mimics arrow up and down; also the third button, often the wheel pressed down, mimics the Enter key.

Normally, you can use the drivers without a hard disk, by booting from floppy.


Ah, I tried out the drivers and unfortunately, my mouse wheel isn't working. :( The wheel button works though when I click down on it.

But the mouse itself works great. I didn't load the usbtool.acc and the mouse still worked. I guess it is only needed for usb-storage or hot-swapping mice?

If I just want mouse support, I wouldn't need the STORAGE.PRG in the auto folder would I? But I would need the other three MOUSE.PRG, USB.PRG, and NETUSBEE.PRG, correct?

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Wed Jan 09, 2019 9:44 pm

TheNameOfTheGame wrote:
Ah, I tried out the drivers and unfortunately, my mouse wheel isn't working. :( The wheel button works though when I click down on it.

But the mouse itself works great. I didn't load the usbtool.acc and the mouse still worked. I guess it is only needed for usb-storage or hot-swapping mice?

If I just want mouse support, I wouldn't need the STORAGE.PRG in the auto folder would I? But I would need the other three MOUSE.PRG, USB.PRG, and NETUSBEE.PRG, correct?


Correct, don't forget the order, so it's USB.PRG, MOUSE.PRG and NETUSBEE.PRG. A long term project is to load the drivers on demand, ie. only have USB.PRG and NETUSBEE.PRG at boot.

USBTOOL.ACC is just to allow hot-swap, and to display the devices attached.

The wheel mouse of my two wireless Logitech mice work. Another (very) long term project is to make all mice work by supporting the HID report protocol.

User avatar
TheNameOfTheGame
Atari God
Atari God
Posts: 1172
Joined: Mon Jul 23, 2012 8:57 pm
Location: Almost Heaven, West Virginia

Re: NetUSBee USB drivers download

Postby TheNameOfTheGame » Wed Jan 09, 2019 10:36 pm

Great, I look forward to the project moving forward. Yes, I have the order right in my AUTO folder. If I get a mouse that has the wheel working correctly, is there a way to adjust the stepping of the scrolling, like 2 or 3 arrow up/down messages per scroll or is it limited to just 1?

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Thu Jan 10, 2019 2:29 am

TheNameOfTheGame wrote:Great, I look forward to the project moving forward. Yes, I have the order right in my AUTO folder. If I get a mouse that has the wheel working correctly, is there a way to adjust the stepping of the scrolling, like 2 or 3 arrow up/down messages per scroll or is it limited to just 1?

It's dynamic. The faster you turn the wheel, the more lines are scrolled. It starts at 1 line per 'notch' turned. I have a free-wheeling Logitech wireless mouse and it can scroll pretty fast.

The wheel on my two wireless Logitech mice work, while a wired Logitech mouse doesn't work.

User avatar
TheNameOfTheGame
Atari God
Atari God
Posts: 1172
Joined: Mon Jul 23, 2012 8:57 pm
Location: Almost Heaven, West Virginia

Re: NetUSBee USB drivers download

Postby TheNameOfTheGame » Thu Jan 10, 2019 2:53 am

Hmm, my mouse is wired also. I wonder if anyone has luck with a wired mouse and could post the model number?

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Fri Jan 11, 2019 2:28 am

TheNameOfTheGame wrote:Hmm, my mouse is wired also. I wonder if anyone has luck with a wired mouse and could post the model number?

Kensington wired mouse model 72111: scroll-wheel & 3rd button work
IBM wired mouse model MO28UO: scroll-wheeel & 3rd button work

User avatar
TheNameOfTheGame
Atari God
Atari God
Posts: 1172
Joined: Mon Jul 23, 2012 8:57 pm
Location: Almost Heaven, West Virginia

Re: NetUSBee USB drivers download

Postby TheNameOfTheGame » Fri Jan 11, 2019 2:55 am

Thanks, I'll look around for one of those mice.

User avatar
TheNameOfTheGame
Atari God
Atari God
Posts: 1172
Joined: Mon Jul 23, 2012 8:57 pm
Location: Almost Heaven, West Virginia

Re: NetUSBee USB drivers download

Postby TheNameOfTheGame » Tue Jan 15, 2019 2:16 am

IBM mouse arrived and it's working great. Scroll wheel works too. Would like the scroll stepping to be even higher, it's still a little slow to go up and down directories and documents even with the dynamic scaling. But overall this is amazing to use my Atari with a usb mouse and scrollwheel! Thanks so much for the work on this project. :cheers:

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Tue Jan 15, 2019 3:31 am

TheNameOfTheGame wrote:IBM mouse arrived and it's working great. Scroll wheel works too. Would like the scroll stepping to be even higher, it's still a little slow to go up and down directories and documents even with the dynamic scaling. But overall this is amazing to use my Atari with a usb mouse and scrollwheel! Thanks so much for the work on this project. :cheers:

Excellent! Glad to hear this. I took note of your suggestion to increase stepping, or make it adjustable.

rcamp48
Atari maniac
Atari maniac
Posts: 94
Joined: Wed Feb 21, 2018 8:03 am

Re: NetUSBee USB drivers download

Postby rcamp48 » Fri Feb 22, 2019 3:29 am

I now have my new NetUSBEE set up too on a Mega ST4 with 4 megs ram, and an AdSApeed 16 Mhz Booster, which programs do I use with it , ST or something else? Cant seem to get it running properly it says USB NOt Loaded

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Tue Feb 26, 2019 1:46 am

rcamp48 wrote:I now have my new NetUSBEE set up too on a Mega ST4 with 4 megs ram, and an AdSApeed 16 Mhz Booster, which programs do I use with it , ST or something else? Cant seem to get it running properly it says USB NOt Loaded

I assume you downloaded the package in the first post. Carefully read the README.TXT file in it. Yes, you need the programs in the ST/TOSMAGIC folder, and the order in the AUTO folder is important. Create an AUTO folder on your boot drive and copy the files one by one, in this order: USB.PRG, MOUSE.PRG, STORAGE.PRG, NETUSBEE.PRG.

6BQ5
Atariator
Atariator
Posts: 22
Joined: Thu Jan 17, 2019 5:59 am
Location: Minden, NV USA

Re: NetUSBee USB drivers download

Postby 6BQ5 » Wed Feb 27, 2019 5:57 am

Sorry for jumping in here ... is there a single all-encompassing document that describes the installation and configuration of the NetUSBee with a storage device? I ask because I recently bought a 520 STe on the cheap and discovered it has a “bad” DMA chip based on the part number. It looks like a NetUSBee is in my future but I would like to find out more about how to get it working, especially how to partition the USB storage device. I have HD Driver on my 1040 STe.

Thanks!! :)

Boris

Atari 130XE
Atari 1040 STe

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Fri Mar 01, 2019 2:19 am

6BQ5 wrote:Sorry for jumping in here ... is there a single all-encompassing document that describes the installation and configuration of the NetUSBee with a storage device? I ask because I recently bought a 520 STe on the cheap and discovered it has a “bad” DMA chip based on the part number. It looks like a NetUSBee is in my future but I would like to find out more about how to get it working, especially how to partition the USB storage device. I have HD Driver on my 1040 STe.

Thanks!! :)

It's very easy with HDDriver's HDDRUTIL program. Make sure you update to the latest version. I have 10.11. You'll see your USB key in the 'Available Devices' window. Choose 'Partition' from the menu, you'll see the screen in USB1.jpg attached. For maximum compatibility, I just create one 512MB partition and click the 'Compatibility' button and configure it as in usb2.jpg. The USB key will then also be readable under Windows and Mac. You may want to create several partitions if you just want to use it as your hard drive.

One thing I didn't try, if I boot from floppy, with the USB drivers first and then HDDriver, can we choose a partition on the USB key to boot from?
You do not have the required permissions to view the files attached to this post.

User avatar
LaceySnr
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 133
Joined: Wed Jun 26, 2013 5:00 am
Contact:

Re: NetUSBee USB drivers download

Postby LaceySnr » Thu Mar 14, 2019 2:16 am

Perdrix24 wrote:For maximum compatibility, I just create one 512MB partition and click the 'Compatibility' button and configure it as in usb2.jpg. The USB key will then also be readable under Windows and Mac. You may want to create several partitions if you just want to use it as your hard drive.


Have you had much luck with more than one partition? I was playing around last night (not for long) with the newest version of HDDriver and a USB stick. First partition works perfectly, second one won't mount under TOS but shows fine in Windows.

Perdrix24
Atari freak
Atari freak
Posts: 57
Joined: Mon Feb 26, 2018 1:47 pm

Re: NetUSBee USB drivers download

Postby Perdrix24 » Thu Mar 14, 2019 5:37 pm

LaceySnr wrote:
Perdrix24 wrote:For maximum compatibility, I just create one 512MB partition and click the 'Compatibility' button and configure it as in usb2.jpg. The USB key will then also be readable under Windows and Mac. You may want to create several partitions if you just want to use it as your hard drive.


Have you had much luck with more than one partition? I was playing around last night (not for long) with the newest version of HDDriver and a USB stick. First partition works perfectly, second one won't mount under TOS but shows fine in Windows.


I remember having more than one partition at one point, but because I can only use one (I have drives already mapped up to N: and CD Recorder on P:), I only have one (O:).

I remember working on the Mega ST, having four partitions but when I put the USB key in the Mac, it created four more if I recall correctly, perhaps to retain compatibility. Try partitioning again, just use TOS, to see if your partitions show. Then put the USB key in Windows and back to TOS to see if there's a difference.

mpattonm
Hardware Guru
Hardware Guru
Posts: 381
Joined: Mon Oct 21, 2002 8:52 am
Location: Czech republic
Contact:

Re: NetUSBee USB drivers download

Postby mpattonm » Fri Mar 15, 2019 8:19 pm

I have built my NetUSBee today and took a time to test it with drivers from this thread. I was stunned how solid USB flashdrive support is. Finally, I have a nice and convenient way to tranfer files between Ataris and a Win world. Thank you!
The USB mouse support works equaly as well, as far as I can say. However, I have encountered issue with hotplug. It seems to work perfectly for either flashdrives alone on USB, or when its just USB mouse alone connected. When there is a flashdrive and mouse connected simultaneously, you can only safely hotplug flashdrive. As soon as you try to remove/replug the mouse, the system simply "freezes".

jd
Captain Atari
Captain Atari
Posts: 320
Joined: Thu Nov 09, 2006 12:38 pm
Location: Ruislip, UK

Re: NetUSBee USB drivers download

Postby jd » Sat Mar 16, 2019 4:00 pm

LaceySnr wrote:
Perdrix24 wrote:For maximum compatibility, I just create one 512MB partition and click the 'Compatibility' button and configure it as in usb2.jpg. The USB key will then also be readable under Windows and Mac. You may want to create several partitions if you just want to use it as your hard drive.


Have you had much luck with more than one partition? I was playing around last night (not for long) with the newest version of HDDriver and a USB stick. First partition works perfectly, second one won't mount under TOS but shows fine in Windows.



I think with HDDRIVER (v8 ish i think) is if you have a windows/tos compatible partition only the first will work hence why it recommends you partition the whole drive as one partition.


Social Media

     

Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests