@sashapont: On Aranym or Hatari 256 colors resolution mode, it works OK on my side. Does it happen only on Firebee? Send me vision.log to see if I see something wrong (make sure to have LoggingFlags = 1ff933f in vision.ini before starting VISION). Are you using "Save as..."? Please describe more your issue.
JeanMars wrote:@eero: you're right, if it is a Falcon, AES popup usage is forced. However it is on purpose as regular Falcon AES version is 0x0330 and so VISION can't rely on appl_getinfo to know about popup features. I could remove this force but in this case, regular Falcon will lose AES popup support...
Code: Select all
TYPE : FALCON030
PROCESSOR : 68030
FREQUENCY : 16 MHz
TOS VERSION : 2.06
GEM VERSION : 0.20
AES VERSION : 1.40
JeanMars wrote:Can you point me to the exact emutos file you are using? I tried on Hatari and it looks OK.
JeanMars wrote:On Hatari, TOS 4.92 and ST-High resolution, help bubble display is correct (see attached picture); what is your configuration exactly?
JeanMars wrote:In 4colors resolution, I agree this is buggy but honestly I won't fix it, this is too an exotic resolution to spend time on it...
Eero Tamminen wrote:(Besides, AFAIK all TOS functions return the function number if TOS didn't recognize the function. I assume the same applies also to AES functions like appl_getinfo().
If you want test for appl_getinfo you can use this:
https://freemint.github.io/tos.hyp/en/a ... l_xgetinfo
JeanMars wrote:Problem with this routine is that it won't return support for a classic Falcon as AES is 3.30.
I have added test for AES version >= 3.30 if Falcon is detected.
Please test it at: http://vision.atari.org/download/temp/vision.zip
I also added a warning message for 4color modes.
Users browsing this forum: No registered users and 1 guest