Calamus 1.09(N) wanted

All about the serious stuff.

Moderators: Mug UK, Zorro 2, Moderator Team

joska
Hardware Guru
Hardware Guru
Posts: 4096
Joined: Tue Oct 30, 2007 2:55 pm
Location: Florø, Norway
Contact:

Calamus 1.09(N) wanted

Postby joska » Fri Nov 28, 2014 1:05 pm

Sometime during the last 10 years or so I have lost my Calamus disks and manual. It was an english edition of 1.09(N). Does anybody know where I can download a copy of this now?
Jo Even

VanillaMiNT - Firebee - Falcon060 - Milan060 - Falcon040 - MIST - Mega ST - STM - STE - Amiga 600 - Sharp MZ700 - MSX - Amstrad CPC - C64

User avatar
calimero
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2202
Joined: Thu Sep 15, 2005 10:01 am
Location: STara Pazova, Serbia
Contact:

Re: Calamus 1.09(N) wanted

Postby calimero » Fri Nov 28, 2014 2:57 pm

You have here Calamus SL

http://milan.kovac.cc/atari/software/?folder=/DTP&i=&c=

But if you want I will upload vesion 1.09 later?
using Atari since 1986.http://wet.atari.orghttp://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X

joska
Hardware Guru
Hardware Guru
Posts: 4096
Joined: Tue Oct 30, 2007 2:55 pm
Location: Florø, Norway
Contact:

Re: Calamus 1.09(N) wanted

Postby joska » Fri Nov 28, 2014 10:10 pm

Thanks, but I already have SL. But it's too resource hungry for my Mega :) Another Atarian sent me 1.09 this afternoon so I'm good.
Jo Even

VanillaMiNT - Firebee - Falcon060 - Milan060 - Falcon040 - MIST - Mega ST - STM - STE - Amiga 600 - Sharp MZ700 - MSX - Amstrad CPC - C64

User avatar
calimero
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2202
Joined: Thu Sep 15, 2005 10:01 am
Location: STara Pazova, Serbia
Contact:

Re: Calamus 1.09(N) wanted

Postby calimero » Sat Nov 29, 2014 9:26 am

cool :)

...and I just check my floppy and I do not have version 1.09 :(

can you upload it to:

http://milan.kovac.cc/atari/software/?folder=/DTP&i=&c=
using Atari since 1986.http://wet.atari.orghttp://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X

User avatar
paul92706
Atari God
Atari God
Posts: 1401
Joined: Mon Apr 25, 2011 4:28 am
Location: Orange, CA

Re: Calamus 1.09(N) wanted

Postby paul92706 » Mon Feb 09, 2015 8:31 pm

calimero wrote:cool :)

...and I just check my floppy and I do not have version 1.09 :(

can you upload it to:

http://milan.kovac.cc/atari/software/?folder=/DTP&i=&c=

that would be great having it in your archieves. :mrgreen:
Atari Falcon CT60/CTPCI 14MB+ 512mb ATI9250 + NetUSBee
Atari Falcon030 CF 4gb + NetUSBee+ 14MB Ram
Atari TT030 2meg STRAM/16meg TTRAM + Nova Adaptor +Maxtor SCSI HD + DaynaPort Pocket SCSI

User avatar
calimero
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2202
Joined: Thu Sep 15, 2005 10:01 am
Location: STara Pazova, Serbia
Contact:

Re: Calamus 1.09(N) wanted

Postby calimero » Mon Feb 09, 2015 8:39 pm

paul92706 wrote:
calimero wrote:cool :)

...and I just check my floppy and I do not have version 1.09 :(

can you upload it to:

http://milan.kovac.cc/atari/software/?folder=/DTP&i=&c=

that would be great having it in your archieves. :mrgreen:

if joska put it there, than it will be :)
using Atari since 1986.http://wet.atari.orghttp://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X

User avatar
Omikronman
Atari Super Hero
Atari Super Hero
Posts: 527
Joined: Wed Dec 01, 2004 12:13 am
Location: Germany
Contact:

Re: Calamus 1.09(N) wanted

Postby Omikronman » Tue Feb 10, 2015 4:55 am

I have Calamus 1.09N lurking around somewhere in my archive, but this one is the german version. :?

User avatar
calimero
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2202
Joined: Thu Sep 15, 2005 10:01 am
Location: STara Pazova, Serbia
Contact:

Re: Calamus 1.09(N) wanted

Postby calimero » Tue Feb 10, 2015 6:47 am

^
if you find it, please upload it to my archive web site.
using Atari since 1986.http://wet.atari.orghttp://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X

User avatar
Omikronman
Atari Super Hero
Atari Super Hero
Posts: 527
Joined: Wed Dec 01, 2004 12:13 am
Location: Germany
Contact:

Re: Calamus 1.09(N) wanted

Postby Omikronman » Tue Feb 10, 2015 11:42 am

Done! :)

User avatar
calimero
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2202
Joined: Thu Sep 15, 2005 10:01 am
Location: STara Pazova, Serbia
Contact:

Re: Calamus 1.09(N) wanted

Postby calimero » Tue Feb 10, 2015 3:05 pm

^
cool! tanks! you are first contributor :)
it was easy, right?

I already add infos, screenshots and video for Calamus 1.09N!
using Atari since 1986.http://wet.atari.orghttp://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X

User avatar
Omikronman
Atari Super Hero
Atari Super Hero
Posts: 527
Joined: Wed Dec 01, 2004 12:13 am
Location: Germany
Contact:

Re: Calamus 1.09(N) wanted

Postby Omikronman » Tue Feb 10, 2015 3:08 pm

I feel honoured to be the first one. :) It was not too easy. I had to rename my zip file three times until I was able to upload. First the name was too long, then the name was in use, then the name was ... but finally I got it. ;)

User avatar
calimero
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2202
Joined: Thu Sep 15, 2005 10:01 am
Location: STara Pazova, Serbia
Contact:

Re: Calamus 1.09(N) wanted

Postby calimero » Tue Feb 10, 2015 3:18 pm

Ah,
I did not foresee this!
I require 8+3 file name but maybe this is not too good idea...
using Atari since 1986.http://wet.atari.orghttp://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X

pnr8uk
Atariator
Atariator
Posts: 22
Joined: Sat Sep 17, 2005 6:57 am

Re: Calamus 1.09(N) wanted

Postby pnr8uk » Mon Aug 10, 2015 7:25 am

I have downloaded the LZH files are these the original disks?

If they are do I need to convert them to run on Steem?

Do you know how to convert ST discs to Steem compatible.

Cheers

User avatar
Omikronman
Atari Super Hero
Atari Super Hero
Posts: 527
Joined: Wed Dec 01, 2004 12:13 am
Location: Germany
Contact:

Re: Calamus 1.09(N) wanted

Postby Omikronman » Mon Aug 10, 2015 7:37 am

I think it might my the original disks. All you need is to tell the steem emulation to use a GEMDOS drive and then to install Calamus in the emulation itself. As far as I know there is no conversion needed.

pnr8uk
Atariator
Atariator
Posts: 22
Joined: Sat Sep 17, 2005 6:57 am

Re: Calamus 1.09(N) wanted

Postby pnr8uk » Mon Aug 10, 2015 7:43 am

Oh wow thanks - you know what's coming now though don't you? What is a GEMDOS drive?

Thanks again

User avatar
Omikronman
Atari Super Hero
Atari Super Hero
Posts: 527
Joined: Wed Dec 01, 2004 12:13 am
Location: Germany
Contact:

Re: Calamus 1.09(N) wanted

Postby Omikronman » Mon Aug 10, 2015 7:46 am

By using a GEMDOS drive the emulation uses a folder on the harddisk of the host system for use as an Atari hard disk drive, so you do not need to open a floppy disk image and you can easy access to the harddisk via the emulation directly. ^^
Last edited by Omikronman on Mon Aug 10, 2015 4:04 pm, edited 1 time in total.

User avatar
dhedberg
Atari Super Hero
Atari Super Hero
Posts: 759
Joined: Mon Aug 30, 2010 8:36 am
Contact:

Re: Calamus 1.09(N) wanted

Postby dhedberg » Mon Aug 10, 2015 3:48 pm

I purchased Calamus 1.09 many years ago and I think I still have the original disks around. Don't know if it was in Swedish or English though. I'll check when I come home...
Daniel, New Beat - http://newbeat.atari.org. Like demos? Have a look at our new Falcon030 demo MORE.

pnr8uk
Atariator
Atariator
Posts: 22
Joined: Sat Sep 17, 2005 6:57 am

Re: Calamus 1.09(N) wanted

Postby pnr8uk » Mon Aug 10, 2015 4:03 pm

Wow would be great if you had it in English.

I had 1.9 and then upgraded to SL and a mega ste4 so wish I had never sold that set up.

Used Quark do years afterwards but missed the simplicity and power of Calamus

User avatar
Atari74user
Captain Atari
Captain Atari
Posts: 297
Joined: Mon Aug 10, 2009 8:00 pm

Re: Calamus 1.09(N) wanted

Postby Atari74user » Mon Aug 10, 2015 5:56 pm

Well, I know I have an original Calamus 1.09N version in English, but I am working away from home, and I'll have to dig it out, as I am currently unpacking and setting up my Atari studio. If I get time I'll update, but I imagine Mr Dhedberg of Newbeat may beat me to it. In the meantime you could check here, but I cannot check what version this is, I suspect 1.09N, or what language:

http://www.planetemu.net/roms/atari-st-applications-st

P.S. Nice site Calimero
Atari Falcon 14mb, 68882, Dual 8gb CF, Steinberg FDI & Analog 8
Atari Jaguar, Rotary controller, Skunkboard & Cat Box
Atari 520STFM 4mb, TOS 2.06 switcher, OverScan, GigaFile, PARCP-USB, Unicorn-USB, System Solutions MiniS HD, SyQuest drives, ICD Link II, PhatBoy MIDI Controller, Philip Rees 5M MIDI merge box, SoundPool MO4, Steinberg MIDEX, SMP II, Emagic Log 3, C-Lab Unitor 2, Combiner & Export expanders

pnr8uk
Atariator
Atariator
Posts: 22
Joined: Sat Sep 17, 2005 6:57 am

Re: Calamus 1.09(N) wanted

Postby pnr8uk » Mon Aug 10, 2015 6:37 pm

Thanks for the link to that Calamus - I can tell you it's a fully working version of SL in English!!! However there are no fonts with it so it's impossible to create any documents.

I am going to try using Hantari and GEMDOS drive - download the proper version and install fonts etc.,

I'll let you know how I get on.

Cheers

p

User avatar
dhedberg
Atari Super Hero
Atari Super Hero
Posts: 759
Joined: Mon Aug 30, 2010 8:36 am
Contact:

Re: Calamus 1.09(N) wanted

Postby dhedberg » Mon Aug 10, 2015 6:50 pm

Here's the English version of Calamus 1.09N with the disks in MSA format and ZIP format. They are a direct copy of my original disks. Would anyone be interested, the third disk C109N_SE.* contains all files required to turn the English version into a Swedish version.

I've put these files up on my Dropbox as calimero's site refused to accept my ZIP files for some reason. I'll keep them on my Dropbox for a while but they won't stay there forever so please grab them ASAP if you're interested.

EDIT: Removed dead links.
Last edited by dhedberg on Wed Sep 19, 2018 6:46 pm, edited 2 times in total.
Daniel, New Beat - http://newbeat.atari.org. Like demos? Have a look at our new Falcon030 demo MORE.

joska
Hardware Guru
Hardware Guru
Posts: 4096
Joined: Tue Oct 30, 2007 2:55 pm
Location: Florø, Norway
Contact:

Re: Calamus 1.09(N) wanted

Postby joska » Mon Aug 10, 2015 7:09 pm

Thank you :)
Jo Even

VanillaMiNT - Firebee - Falcon060 - Milan060 - Falcon040 - MIST - Mega ST - STM - STE - Amiga 600 - Sharp MZ700 - MSX - Amstrad CPC - C64

User avatar
Atari74user
Captain Atari
Captain Atari
Posts: 297
Joined: Mon Aug 10, 2009 8:00 pm

Re: Calamus 1.09(N) wanted

Postby Atari74user » Mon Aug 10, 2015 7:10 pm

Look at that, seems as though our Mr Newbeat delivered :wink:
I think I better get myself over to your site and purchase that ACE Midi I keep promising myself! :cheers:
Atari Falcon 14mb, 68882, Dual 8gb CF, Steinberg FDI & Analog 8
Atari Jaguar, Rotary controller, Skunkboard & Cat Box
Atari 520STFM 4mb, TOS 2.06 switcher, OverScan, GigaFile, PARCP-USB, Unicorn-USB, System Solutions MiniS HD, SyQuest drives, ICD Link II, PhatBoy MIDI Controller, Philip Rees 5M MIDI merge box, SoundPool MO4, Steinberg MIDEX, SMP II, Emagic Log 3, C-Lab Unitor 2, Combiner & Export expanders

pnr8uk
Atariator
Atariator
Posts: 22
Joined: Sat Sep 17, 2005 6:57 am

Re: Calamus 1.09(N) wanted

Postby pnr8uk » Mon Aug 10, 2015 7:57 pm

Getting close :)
Close.PNG
You do not have the required permissions to view the files attached to this post.

User avatar
dhedberg
Atari Super Hero
Atari Super Hero
Posts: 759
Joined: Mon Aug 30, 2010 8:36 am
Contact:

Re: Calamus 1.09(N) wanted

Postby dhedberg » Mon Aug 10, 2015 8:25 pm

Calamus 1.09N was released before TOS 2.06 I'm pretty sure. Try an older TOS version and it should work. Just tried it on an STE with TOS 1.62 and it works.
Last edited by dhedberg on Wed Aug 12, 2015 9:17 am, edited 2 times in total.
Daniel, New Beat - http://newbeat.atari.org. Like demos? Have a look at our new Falcon030 demo MORE.


Social Media

     

Return to “Applications”

Who is online

Users browsing this forum: No registered users and 1 guest