Will ghostlink work with windows xp and how?
Zorro 2 wrote:I update the PARCP utility by version 3.80.
Bnicke wrote:I made a disk-img and an instruction to a forum-friend some time ago.
Unfortunate, the readme I wrote, is in Swedish... but basicly it say:
Connect a null moden cable between the Atari and the PC...
Put stmaster.prg, all files from control.zip and msa_2_32.prg on a 720K disk.
put xcontrol.acc in the rootdir and boot the ST with the disk
Open Desk->"control panel" point att the cpx dir, save and reboot
Open control panel again, choose Modem Setup.
Set Baudrate 19200 Bits/char 8 bit, 1 stopbit, no parity, no flowcontrol. I use xcontrol to set the bouderate.. otherwise it will be 9200 I think.
Start stmaster.prg in medium or high res (in low, only half of the GUI vill be visable)
Change (remove/add) the partitions if you want different disk setup, I have z: ALL 1
Mark a drive (ex a:), options > install diskdrive.. In earlier TOS versions you heve to specify z: (or whatever you choosed in the previous step) and give it a name, in later it just shows up.
Do not open Z: just yet...
Start pcslave.exe on the PC and press F7 to change the bitrate to 19200 and set the appropriate com port.
Now you can browse the PC:s HD(s) on z:.
If you want to read/write a MSA-file from/to the PC, fire up the MSA-II on the Atari and choose MSA-File (Ex. z:\c\atari_st\cuddly.msa) and run File->Disk or Disk->File.
I also made a disk image (GHOSTLNK.MSA) of the disk (720k) which is writable on a MSA-app on PC...
Users browsing this forum: No registered users and 6 guests