mattsoft wrote:I know you're planning on using the Retronic Design hardware for the DB9 ports but just wanted to mention that the Amiga mouse FW for the Retronic does NOT work with the MiSTer. The MiSTer does not track mouse movements with a real Amiga ball mouse connected to the Retronic Design adapter into USB.
mattsoft wrote:The MiSTer does not track mouse movements with a real Amiga ball mouse connected to the Retronic Design adapter into USB.
Flausch wrote:mattsoft wrote:The MiSTer does not track mouse movements with a real Amiga ball mouse connected to the Retronic Design adapter into USB.
But why use on old amiga mouse?
Using classic DB9 joysticks is different, because it is a completely different feel. It is quite hard to play some games like Decathlon or Summer Games using a thumbstick controller. Joysticks have a total different feel than p.e. an xbox controller.
But I don't see any difference in using a classic mouse over a modern USB mouse?
Sorgelig wrote:Considering the popularity of 8bitdo (and mayflash) it's better to keep in mind the dimensions of these dongles. It's basically impossible to use USB and DB9 at the same time unless you use extension cable.
Sorgelig wrote:Probably it's better to redesign the board to make the space between USB ports. Maybe abandon (or move to bottom side) the ESP32 module, so USB ports can be placed on longer sides with one row to lower the height.
It's just my opinion - you may have other vision of course.
THaase wrote:and the Nordic is a BT5 Device so no BT Classic - so the lag will be higher - OK, just about 10ms if you get the connection interval as low, but: PS3 Controllers use BT-Classic AFAIK - so there will be no chance to support these ....
Sorgelig wrote:This is what unclear to me. From one side it's not BT classic, but from other side i've saw some examples to use nRF51/52 as a BT keyboard. It's actually reverses to what we need but anyway it works somehow.
Sorgelig wrote:vUSB is software USB and i'm afraid it may add lag due to MCU will be very busy by USB emulating.
Sorgelig wrote:This i believe will also limit the number of BT devices can be connected as they definitely will require more processing time.
Probably standard USB serial link on ESP32 can be used - i just don't know if it will add too much overhead to poll the joysticks behind the serial link.
Users browsing this forum: No registered users and 9 guests