Local Sellers for MiSTer Expansion Boards

https://github.com/MiSTer-devel/Main_MiSTer/wiki

Moderators: Mug UK, Zorro 2, Greenious, spiny, Sorgelig, Moderator Team

THaase
Captain Atari
Captain Atari
Posts: 178
Joined: Mon Oct 16, 2017 8:39 am
Location: Germany

Re: Local Sellers for MiSTer Expansion Boards

Postby THaase » Sat Jul 13, 2019 9:46 pm

Sorgelig wrote:
THaase wrote:6.0: Switch for the fan is gone agin

it's not gone. It's added. You can use either 0R resistors or use the jumper/switch.


Has to be too less coffee before answering :D

THaase wrote:@Sorgelig: in the Schematics you refer to R beeing 240R or 300R - have you done some calculations about the wave resistance for the R2R Network.
If I remember right the older one with the R1=510R has been quite near to the theoretical needed 75R?

I didn't. Actually i had no much choice for R-2R values. Basically only these 2 values are found on Mouser. I've tested it on my monitor and picture with 300R is close to what was in v5.6. I've also tried 499/1K but picture is darker.[/quote]

OK, thanks for the Info - as I said - just academic ....
I've had also searched for a full intergrated one ... basically found one from AD (would hve to check again) - but if I remember right this needed some kind of clock (don't ask me for the purpose at the moment - can't remember :) )

THaase
Captain Atari
Captain Atari
Posts: 178
Joined: Mon Oct 16, 2017 8:39 am
Location: Germany

Re: Local Sellers for MiSTer Expansion Boards

Postby THaase » Mon Jul 15, 2019 7:41 am

THaase wrote:I've had also searched for a full intergrated one ... basically found one from AD (would hve to check again) - but if I remember right this needed some kind of clock (don't ask me for the purpose at the moment - can't remember :) )


Just checked - it's ADV7125.

Pro:
- Best possible VGA output (most likely)

Contra:
- Expensive - about $10 - yeah $10
- Needs a clock line (basically there is still a free signal at P7 :-) )

This might be the ultimate solution for all the VGA enthusiasts - but: Did I say that it is quite expensive? :-)

Edit:
OK, found it at lcsc (why not before :oops: ) - so $3.90 single unit - maybe worth to think about

coldwilson
Atarian
Atarian
Posts: 1
Joined: Sat Jul 13, 2019 8:18 pm

Re: Local Sellers for MiSTer Expansion Boards

Postby coldwilson » Tue Jul 16, 2019 11:50 am

Hi,

I've just received the USB hub v1.2 from sawf01 together with the power split and bridge board. All very well made and working perfectly with very fast delivery. Highly recommended.

normal19
Atarian
Atarian
Posts: 4
Joined: Sat Jul 20, 2019 4:17 pm

Re: Local Sellers for MiSTer Expansion Boards

Postby normal19 » Sat Jul 20, 2019 4:24 pm

digitron wrote:**MiSTer v5.6 I/O Board + Alliance Memory Vertical SDRam Package**

**$60 shipped via Priority Mail in the USA, 1 sold, 3 kits remaining**

High quality Alliance Memory tested for over 1 hour, stable at 160Mhz (highest for this vertical board configuration)

These come with high quality Noctua NF-A4x10 5V fans, the fans alone cost $14 ea

I enjoy soldering smd components and do so as a hobby, I'm selling these at a very low cost back to the community.

Send me a PM if you have any questions.

Thank you :)

Do you still have this in stock? Ordering from USA

darcoza
Atarian
Atarian
Posts: 4
Joined: Wed Dec 05, 2018 5:52 pm

Re: Local Sellers for MiSTer Expansion Boards

Postby darcoza » Tue Jul 23, 2019 1:01 pm

THaase can you update my information at the front of the thread? I'm dropping the price of my SDRAM boards to $20 for preassembled boards and $15 for DIY.

Thanks!

simbin
Atarian
Atarian
Posts: 1
Joined: Mon Oct 22, 2018 6:44 pm

Re: Local Sellers for MiSTer Expansion Boards

Postby simbin » Fri Jul 26, 2019 5:18 am

Who are the recommended sellers for 64MB boards here in the USA?

THaase
Captain Atari
Captain Atari
Posts: 178
Joined: Mon Oct 16, 2017 8:39 am
Location: Germany

Re: Local Sellers for MiSTer Expansion Boards

Postby THaase » Fri Jul 26, 2019 6:57 am

Have a look to the leading post - BUT:

At the moment it's not clear which way the path will go - from the checkins in the github it might become a 128MB module not a 64MB one.
So keep patient (as we all do), let Sorgelig do his job and as soon as the final decision has been done I'm sure that some of the actual sellers will also offer the new module.

Sorgelig
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4879
Joined: Mon Dec 14, 2015 10:51 am
Location: Russia/Taiwan

Re: Local Sellers for MiSTer Expansion Boards

Postby Sorgelig » Fri Jul 26, 2019 2:28 pm

It's less likely 128MB board will appear.
There is an option to use 2 SDRAM modules. So with 64MB on each connector we can have 128MB.

THaase
Captain Atari
Captain Atari
Posts: 178
Joined: Mon Oct 16, 2017 8:39 am
Location: Germany

Re: Local Sellers for MiSTer Expansion Boards

Postby THaase » Fri Jul 26, 2019 2:45 pm

Thanks for clarification

JimDrew
Atari Super Hero
Atari Super Hero
Posts: 803
Joined: Mon Nov 04, 2013 5:23 pm

Re: Local Sellers for MiSTer Expansion Boards

Postby JimDrew » Sat Jul 27, 2019 6:37 am

simbin wrote:Who are the recommended sellers for 64MB boards here in the USA?


I have some already, but every post I make about this is being deleted by someone?
I am the flux ninja

digitron
Atari freak
Atari freak
Posts: 57
Joined: Sat Apr 20, 2019 7:27 pm

Re: Local Sellers for MiSTer Expansion Boards

Postby digitron » Sat Jul 27, 2019 4:35 pm

.
Last edited by digitron on Thu Aug 01, 2019 7:56 pm, edited 1 time in total.

sirtonk
Atarian
Atarian
Posts: 2
Joined: Tue Jul 30, 2019 3:24 am

Re: Local Sellers for MiSTer Expansion Boards

Postby sirtonk » Tue Jul 30, 2019 3:28 am

Thanks for maintaining this thread, it's been really helpful.

THaase
Captain Atari
Captain Atari
Posts: 178
Joined: Mon Oct 16, 2017 8:39 am
Location: Germany

Re: Local Sellers for MiSTer Expansion Boards

Postby THaase » Tue Jul 30, 2019 6:33 am

You're welcome!

And again: Everybody who is planning to offer boards (on regular basis or just for some time) and would like to be added to the leading post is welcome to send me a mail or a PM and I will add him/her.
Same for all listed sellers if they want to be removed or changed - send me a mail/PM :-)

Sorgelig
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4879
Joined: Mon Dec 14, 2015 10:51 am
Location: Russia/Taiwan

Re: Local Sellers for MiSTer Expansion Boards

Postby Sorgelig » Tue Jul 30, 2019 10:38 am

I want to be more specific: only sellers who sell open source based hardware.
Any sellers pretending to be more smarter to piggyback on MiSTer project with their closed source boards ARE NOT WELCOME here.
I think i'm pretty clear. No need to open discussion about this.

orange808
Atarian
Atarian
Posts: 6
Joined: Wed Dec 19, 2018 2:00 am

Re: Local Sellers for MiSTer Expansion Boards

Postby orange808 » Mon Aug 05, 2019 9:22 pm

Pardon my ignorance as I haven't been following the forum closely. Is the LL Cool Joy going to be open source board or is it one I should avoid discussing here?

I agree with you. Keeping it all open source is best.

User avatar
SHIFT838
Atariator
Atariator
Posts: 28
Joined: Tue Mar 15, 2016 9:31 pm
Contact:

USB Hub Boards 1.2 for sale

Postby SHIFT838 » Mon Aug 19, 2019 3:10 am

I have a few of the USB hub boards v 1.2 (blank pcb's). I had to order a minimum order, so I have a few left if you are a DIY'er and want one contact me privately. $5.00(US) plus shipping each.

I an also provide some of the components if needed for additional cost like the USB connectors, capacitors, resistors, etc.

PM me.
Chris Schneider
SHIFT838
http://shift838.99er.net

Live TI-99 CHAT
http://shift838.99er...ex.php#TI-99ers

FuSiON BBS Information:
http://sourceforge.n...ource=directory

Online for Telnet only at:
fusionbbs.ddns.net : Port # 9640

groggycarpet
Atarian
Atarian
Posts: 1
Joined: Tue Nov 20, 2018 7:58 pm

Re: Local Sellers for MiSTer Expansion Boards

Postby groggycarpet » Tue Sep 10, 2019 5:06 pm

normal19 wrote:
digitron wrote:**MiSTer v5.6 I/O Board + Alliance Memory Vertical SDRam Package**

**$60 shipped via Priority Mail in the USA, 1 sold, 3 kits remaining**

High quality Alliance Memory tested for over 1 hour, stable at 160Mhz (highest for this vertical board configuration)

These come with high quality Noctua NF-A4x10 5V fans, the fans alone cost $14 ea

I enjoy soldering smd components and do so as a hobby, I'm selling these at a very low cost back to the community.

Send me a PM if you have any questions.

Thank you :)

Do you still have this in stock? Ordering from USA


I would also be interested in purchasing from USA

alexj212
Atarian
Atarian
Posts: 3
Joined: Sun Nov 18, 2018 12:54 am

Re: Local Sellers for MiSTer Expansion Boards

Postby alexj212 » Wed Sep 11, 2019 1:33 pm

Board has been sold -
Combination Mister IO board 5.5 + SD Ram XS v1.1 $35 shipping included in the USA. PM me if you are interested.

Alex


Return to “MiSTer”

Who is online

Users browsing this forum: No registered users and 5 guests