Nextric wrote:Hello guys, i have a problem in my ASUS monitor. I dont have sound in zx spectrum core. ¿Anybody have the same problem?
NML32 wrote:Nextric wrote:Hello guys, i have a problem in my ASUS monitor. I dont have sound in zx spectrum core. ¿Anybody have the same problem?
You didn't give very many details so try these things and see if it fixes your sound problem.
Things to check or try:
I'm using core: Zx Spectrum_20180101.rbf and my sound works fine through my Samsung HDMI TV port.
Make sure you are running the latest MiSTer
Try setting your hdmi_audio_96k to 0 in your Mister.ini file located in the config folder of your SD card.
Code: Select all
key_menu_as_rgui=0 ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga)
forced_scandoubler=0 ; set to 1 to run scandoubler on VGA output always (depends on core).
ypbpr=0 ; set to 1 for YPbPr on VGA output.
composite_sync=0 ; set to 1 for composite sync on HSync signal of VGA output.
vga_scaler=0 ; set to 1 to connect VGA to scaler output.
hdmi_audio_96k=0 ; set to 1 for 96khz/16bit HDMI audio (48khz/16bit otherwise)
keyrah_mode=0x18d80002 ; VIDPID of keyrah for special code translation (0x23418037 for Arduino Micro)
; USER button emulation by keybaord. Usually it's reset button.
; 0 - lctrl+lalt+ralt (lctrl+lgui+rgui on keyrah)
; 1 - lctrl+lgui+rgui
; 2 - lctrl+lalt+del
; 3 - same as 0 (lctrl+lalt+ralt on keyrah)
dvi_mode=0 ; set to 1 for DVI mode. Audio won't be transmitted through HDMI in DVI mode.
; 0 - 1280x720@60
; 1 - 1024x768@60
; 2 - 720x480@60
; 3 - 720x576@50
; 4 - 1280x1024@60
; 5 - 800x600@60
; 6 - 640x480@60
; 7 - 1280x720@50
; custom mode: 0,hact,hfp,hs,hbp,vact,vfp,vs,vbp,4,M,3,N,5,C0,9,CP,8,BW,7,Mfrac
; custom mode: 1,hact,hfp,hs,hbp,vact,vfp,vs,vbp,Fpix
Nextric wrote:Yes NML32, I have sound in other cores. Currently I have installed minimig and C64 cores both with sound.
Users browsing this forum: No registered users and 1 guest