MiSTer: MiST on Terasic DE10-nano board.

https://github.com/MiSTer-devel/Main_MiSTer/wiki

Moderators: Mug UK, Zorro 2, Greenious, spiny, Sorgelig, Moderator Team

kolla
Captain Atari
Captain Atari
Posts: 210
Joined: Thu Sep 17, 2015 11:39 pm
Contact:

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby kolla » Mon Apr 16, 2018 8:21 pm

-- kolla

User avatar
sonic74
Atarian
Atarian
Posts: 3
Joined: Tue Apr 10, 2018 9:28 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby sonic74 » Thu Apr 19, 2018 1:23 am

Thanks for the link, but I already bought https://www.waveshare.com/product/modul ... h-case.htm
A bit bulky and lower resolution, but similar power consumption (3 W) and a headphone jack.

BlockABoots
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 133
Joined: Sat Oct 20, 2018 3:20 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby BlockABoots » Sat Nov 03, 2018 7:41 pm

toromand wrote:I just made a replacement top acrylic plate for my board with a holder for 12v 40mm fan.


How did you manage to get a 12v fan to work on this board?

witchmaster
Atari maniac
Atari maniac
Posts: 83
Joined: Wed Jun 15, 2011 10:50 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby witchmaster » Sat Nov 03, 2018 8:10 pm

BlockABoots wrote:
toromand wrote:I just made a replacement top acrylic plate for my board with a holder for 12v 40mm fan.


How did you manage to get a 12v fan to work on this board?

I also use a 12V fan from an old graphics accelerator with the MISTer, I have it running on 5V. Some 12V fans will work at 5V, they will spin slower and be quieter, but with a reduced airflow of course.

EDIT: The board has also got a 9V output (Arduino header).
Last edited by witchmaster on Sat Nov 03, 2018 8:23 pm, edited 1 time in total.

BlockABoots
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 133
Joined: Sat Oct 20, 2018 3:20 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby BlockABoots » Sat Nov 03, 2018 8:15 pm

witchmaster wrote:
BlockABoots wrote:
toromand wrote:I just made a replacement top acrylic plate for my board with a holder for 12v 40mm fan.


How did you manage to get a 12v fan to work on this board?

I also use a 12V fan from an old graphics accelerator with the MISTer, I have it running on 5V. Some 12V fans will work at 5V, they will spin slower and be quieter, but with a reduced airflow of course.


Hmm yeah the fan i have sort of jolts when i connect it up but doesn't spin :(

THaase
Captain Atari
Captain Atari
Posts: 181
Joined: Mon Oct 16, 2017 8:39 am
Location: Germany

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby THaase » Sun Nov 04, 2018 9:59 am

Not every 12V fan will spin up with 5V.
Try another one or go for a 5V fan.

Unrealcpu
Atariator
Atariator
Posts: 26
Joined: Tue Oct 30, 2018 2:05 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby Unrealcpu » Sun Nov 04, 2018 4:53 pm

Can the Roland MT-32 work with the Mister FPGA? if so how do you get it to work and which IO board would i need ?

BBond007
Captain Atari
Captain Atari
Posts: 366
Joined: Wed Feb 28, 2018 3:23 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby BBond007 » Sun Nov 04, 2018 11:25 pm

Unrealcpu wrote:Can the Roland MT-32 work with the Mister FPGA? if so how do you get it to work and which IO board would i need ?


You would need a MIDI adapter. MIDI for MiSTer is currently in development.

Information about the upcomming MIDI IO board --> viewtopic.php?f=117&t=34579
Information on using a USB MIDI adapter Amiga and ao486 cores (with MT-32) --> viewtopic.php?f=117&t=34599

huh123
Atarian
Atarian
Posts: 7
Joined: Sat Oct 13, 2018 2:21 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby huh123 » Fri Nov 09, 2018 6:12 am

This is the only place I can think of to ask. So if I'm not getting a usb hub board, what is a good retail usb hub (micro or mini? Whatever is better) that can support more than 2-3 usb devices? Is this possible on this? Been googling for the answer, but I see a few things that lead to nothing. Is there a guide that shows compatibility of certain retail usb hubs for this?

hyperterminal
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 127
Joined: Sun Jul 09, 2017 1:43 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby hyperterminal » Fri Nov 09, 2018 9:37 am

huh123 wrote:This is the only place I can think of to ask. So if I'm not getting a usb hub board, what is a good retail usb hub (micro or mini? Whatever is better) that can support more than 2-3 usb devices? Is this possible on this? Been googling for the answer, but I see a few things that lead to nothing. Is there a guide that shows compatibility of certain retail usb hubs for this?

I bought this one: https://www.digikey.com/catalog/en/partgroup/2991/60736

huh123
Atarian
Atarian
Posts: 7
Joined: Sat Oct 13, 2018 2:21 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby huh123 » Fri Nov 09, 2018 5:58 pm

hyperterminal wrote:
huh123 wrote:This is the only place I can think of to ask. So if I'm not getting a usb hub board, what is a good retail usb hub (micro or mini? Whatever is better) that can support more than 2-3 usb devices? Is this possible on this? Been googling for the answer, but I see a few things that lead to nothing. Is there a guide that shows compatibility of certain retail usb hubs for this?

I bought this one: https://www.digikey.com/catalog/en/partgroup/2991/60736

Hey. Thanks for the recommendation. Saw this this morning but I ended up putting a purchase for this one before I saw this reply. Do you or anyone think this would work with a micro to usb adapter?
The hub:
https://www.amazon.com/gp/product/B0192LPK5M/
The adapter:
https://www.amazon.com/gp/product/B00BFYH11Q

Edit: Just wanted to confirm this works when looking for a hub and a dongle converter.

pedranic
Atarian
Atarian
Posts: 5
Joined: Thu Jul 25, 2019 6:56 pm

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby pedranic » Thu Jul 25, 2019 7:01 pm

Hello,

I have just received the De10 and i am waiting for addons. I would like to know, what is the best material for attach the heatsink to the chip. I am looking at internet, and maybe the best option is the thermal adhesive (it is not thermal paste).

My addons is not the official one, so the only way to attach the fan to the heatsink is by screws directly to the fan.

Thanks for the help.

warham
Atari maniac
Atari maniac
Posts: 83
Joined: Fri Oct 12, 2018 7:17 am

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby warham » Fri Jul 26, 2019 7:04 am

looks like there is a new similar spec board

http://mail.terasic.com.tw/epaper/2019/newsroom/tsom.html

Sorgelig
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4893
Joined: Mon Dec 14, 2015 10:51 am
Location: Russia/Taiwan

Re: MiSTer: MiST on Terasic DE10-nano board.

Postby Sorgelig » Fri Jul 26, 2019 2:32 pm

warham wrote:looks like there is a new similar spec board

http://mail.terasic.com.tw/epaper/2019/newsroom/tsom.html

It has not enough GPIOs for SDRAM.
Although it has separate DDR3 chips for sole FPGA use. But i doubt it will be possible to use it anyway due to DDR3 latency. Well, it needs experiments to see if it's still possible to use for retro DRAM emulation and at which degree.

Btw, this SOM absolutely requires its dock board to be able to use for MiSTer. So, price is not attractive any more.


Return to “MiSTer”

Who is online

Users browsing this forum: No registered users and 3 guests