ATART ST - How to get RGB/SCART

[Higgy]

Hi,

How do you get it to boot in SCART for use with CRT TV?
If I boot I get angled white/black lines, if I plug into a PC monitor I get a picture. But I would like RGB output
(thanks also for the recent Component Output, although I only have LCD TV's with that option)

[desUBIKado]

Do you have this in you mist.ini file ?

Code: Select all

[mist]
scandoubler_disable=1          ; set to 1 to run supported cores in 15khz


[DrOG]

Or you may switch on the fly between 31kHz and 15kHz modes pushing and holding the middle (menu) button on the MiST.

It worths to check the settings in menu, sometimes the core strucks in non-RGB standard B&W mode. There's an option for PAL mode switching between 50<->56Hz, the 50 is RGB compatible.

[Higgy]

It was the 'mono' setting. I changed it but I can't save Core settings?

Is there an Atari ST Core save file I am missing? I have a mist.ini on the SDcard already.

[Higgy]

Solved - you need to create MiST.cfg on the SDcard.
As the MiST cannot create the file but it can write to an existing file.