lips2k15 wrote:I too was thinking about this... maybe route the tape audio input the current core uses to send its loading sounds to the fpga ula so it goes from one of the db9 joystick ports instead - it would only need to 2 pins a signal and a ground and would be easy to wire up a cable to plug into a cassette recorder!!!
javidoom wrote:So, if it's possible, this could be a great addition to your Spectrum core Sorgelig.
I have so many tapes waiting to be loaded again...
I would help if I had the knowledge...
javidoom wrote:The V6z80p FPGA has an audio cable with some kind of components... maybe it could be something similar?
ericgus wrote:Sorgelig how difficult is it to enable the MiST midi serial lines like you did with the spectrum core for other cores say the C64 core to enable ttl serial connections via the same midi pins on the MiST board? Just curious..
I only ask as I am looking at the core source in Quartus and trying to figure this same sort of mod out to enable serial comms on the c64 user port.
javidoom wrote:IT WORKSSSS!!! FLAWLESSLY!!!!!
Sorgelig wrote:As for C64 - everything is going through very specific chips. So, i have no idea how RS232 is connected in C64 and if all required chips are properly emulated.
Users browsing this forum: No registered users and 6 guests