DrOG wrote:You can remap it by yourself following this tutorial:
https://github.com/mist-devel/mist-boar ... ickMapping
(You only need to modify the mist.ini file as described on the page linked above.)
DrOG wrote:Which version of MiST do you have?
A have an older, metal-cased one without MIDI addon, containing PBC 1.3 and Hynix memory modules, and didn't notice similar issues. You can try alternatively a component cable, if your TV has YPbPr input. The NES core is compatible with it, see schematics and other details here:
https://github.com/mist-devel/mist-boar ... PbPr_Cable
I tested formerly this core thoroughly, without problem. Here are my experiences:
DrOG wrote:I have a Philips CM8833, which works great in case the core supports 15kHz (scandoubler disabled). The Commodore 1084S-D2 worths a try.
Other recommended topics for reading:
MiST and RGB Output
MiST VGA Compatibility
15 kHz Scart RGB
DrOG wrote:Sounds interesting...
There are minor differences between MiST versions, i.e. the memory module is not the same in earlier and later models, and that's causing minor incompatibilities.
The MSX and the Acorn Archimedes are (were) the two affected cores so far, perhaps the 1.3+ version has issues with other cores also.
It would be nice if you could try these known-to-be-problematic cores on your device, and if someone else who has the 1.3+ would confirm the video bug in case of NES core.
Here you can find the above mentioned ones (both has an older, stable and a newer, imoproved compatible version, unfortunately with stability issues):
https://github.com/mist-devel/mist-bina ... archimedes
Try the 'archimedes_150416_r1028.rbf' please!
https://github.com/Gehstock/Mist_Cores/ ... des%203000
Download the 'archimedes.rbf'!
https://github.com/mist-devel/mist-bina ... es/msx/old
Try the latest version: 'ocmsx_141022_r364.rbf'.
https://github.com/mist-devel/mist-bina ... /cores/msx
'ocmsx_161226.rbf' - this is the newest.
Of course it would be nice if you could test all the available cores, but there are so many of them (more than 40)...
dzeq wrote:Test results:
New MSX core works with no problem
Old MSX core hangs on BIOS loading (before progress bar appear)
New Archimedes core boots after pressing reset button, have bought RISC 3.11 image from http://www.riscos.com,
can run paint and draw something, tried with Elite - game runs, but I do not have manual to enter a password.
StarFighter 3000 do not run. Core is unstable, hangs time to time when I was playing with OS.
Old core do not boot ,or boots partially without RISCOS so I can not see it couse do not have 15kHz monitor at the moment....
Users browsing this forum: No registered users and 2 guests