AdvancedFollower wrote:I just got the Mist and I've been testing it with my GW2750HM monitor....
The only 2 cores that haven't worked are the Amstrad and the Atari. Immediately upon loading them, I just get the "Out of Sync" message on the screen. I tried several different images of TOS (UK, USA, Sweden..) but the result is always the same.
Does your monitor support interlaced (scandoubler disabled) mode and composite sync over VGA pin 13?
I see the specs are from 30kHz to 83kHz, but I think it worths to try: after selecting the problematic core, try to push the MiST's middle button for a longer period (2 secs).
The new Amstrad core has an option to switch between 800x600@73Hz and 720x576@50Hz, but first you need to access the menu to modify this. It needs some additional files as well to work properly:https://github.com/mist-devel/mist-bina ... strad/ROMs
I suppose You mean the Atari ST core. We have an Atari 2600 and an Atari 800 XL/5200 core also.
The ST core has 6 different video modes:
PAL interlaced, PAL 50Hz VGA, PAL 56Hz VGA, NTSC interlaced, NTSC VGA and B&W. You can modify the video standard with the TOS file you use: i.e. UK version results PAL, the US NTSC modes to be available. Between PAL modes (50/56Hz) and B/W you need to use the menu, which is difficult if you have no video...
Atari 2600 has no compatibility issues, Atari XL / 5200 needs some additional ROM files and special folder structure on SD card:https://github.com/mist-devel/mist-bina ... readme.txt