Page 1 of 1

CosmosEX (SCSI) in MegaSTE

Posted: Sun Feb 19, 2017 8:56 am
by watzl-berg
Has anyone running a CosmosEX (SCSI-Version) running on the internal SCSI-adapter in a MegaSTE? In my opinion this could work without any problems. Or are there any restrictions due to the ASCI-SCSI- adapter?

Re: CosmosEX (SCSI) in MegaSTE

Posted: Mon Feb 20, 2017 11:31 am
by Bama
Hi watzi-berg,

I'm definitely not an expert on par with our fellow Atarians on this site. That being said, If I remember correctly there probably will be a number of limitations when using the internal ACSI to SCSI adapter.
1) limited to SCSI ID 0
2) limited to 1 GB
3) limited to non-parity ( I don't know if the Cosmos-Ex generates a parity signal or not.)

For use inside the MSTE, you may want to bypass the SCSI adapter and connect directly to the internal ACSI connection (proper cable/adapter probably required) or route the external ACSI cable back inside as displayed by Jookie's FAQ.

I hope this helps until other more technically savvy contributors can comment.

Re: CosmosEX (SCSI) in MegaSTE

Posted: Mon Feb 20, 2017 11:36 am
by Bama
Hi watzi-berg,

I think your question may have been answered in previous posts.

viewtopic.php?f=103&t=29667