New transparent CosmosEx case for 3D printing

News, questions and bugs reports about CosmosEx by Jookie. Now we have a Raspberry Pi in our machines!

Moderators: Jookie, Moderator Team

User avatar
simonsunnyboy
Moderator
Moderator
Posts: 4774
Joined: Wed Oct 23, 2002 4:36 pm
Location: Friedrichshafen, Germany
Contact:

New transparent CosmosEx case for 3D printing

Postby simonsunnyboy » Tue Jan 24, 2017 4:27 pm

This was posted over at Facebook, maybe it is of interest:

http://arananet-net.kinja.com/disenando ... 5274362968
Simon Sunnyboy/Paradize - http://paradize.atari.org/ - STOT: http://www.npoi.de/stot/

Stay cool, stay Atari!

1x2600jr, 1x1040STFm, 1x1040STE 4MB+TOS2.06+SatanDisk, 1xF030 14MB+FPU+NetUS-Bee

Jabber: simonsunnyboy@atari-jabber.org

User avatar
Jookie
Hardware Guru
Hardware Guru
Posts: 1245
Joined: Wed Feb 04, 2004 6:54 pm
Location: Kosice, Slovakia
Contact:

Re: New transparent CosmosEx case for 3D printing

Postby Jookie » Wed Jan 25, 2017 6:51 am

I saw it, and I like it ;)

User avatar
MiggyMog
Atari Super Hero
Atari Super Hero
Posts: 794
Joined: Sun Oct 30, 2005 4:43 pm
Location: Scotland

Re: New transparent CosmosEx case for 3D printing

Postby MiggyMog » Mon Apr 10, 2017 11:10 pm

That looks cool! I imagine interference would be more of an issue without the shielding though?
('< o o o o |''| STM,2xSTFM,2xSTE+HD,C-Lab Falcon MK2+HD,Satandisk,Ultrasatandisk,Ethernat.

User avatar
leech
Atari Super Hero
Atari Super Hero
Posts: 851
Joined: Tue Dec 01, 2015 3:26 pm

Re: New transparent CosmosEx case for 3D printing

Postby leech » Mon Apr 10, 2017 11:46 pm

Nice. I still need to measure out how to fit it into a TT030 or Mega STe. Seems it'd be the perfect thing inside the Hard drive mount. You could connect network via wifi, SCSI and Floppy drive to it fairly easily in there, and it's the only set up I can think of where you wouldn't have things laying around outside.
Atari 8Bits: 800xl, 600xl, XEGS, 800, 130xe, 130xe (fully upgraded (soon!))
Atari STs: 1040STf (broken shifter), 1040STe, Mega STe, TT030, Falcon (CT60e, SuperVidel)

User avatar
Estrayk
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 142
Joined: Mon Nov 23, 2015 2:52 pm
Location: Spain

Re: New transparent CosmosEx case for 3D printing

Postby Estrayk » Tue Apr 11, 2017 3:47 pm

leech wrote:Nice. I still need to measure out how to fit it into a TT030 or Mega STe. Seems it'd be the perfect thing inside the Hard drive mount. You could connect network via wifi, SCSI and Floppy drive to it fairly easily in there, and it's the only set up I can think of where you wouldn't have things laying around outside.


https://youtu.be/7-C-SgGBKBI

Here you can see an old video that I made for Uwe about a bug in his HDDRIver and you can see my MegaSTE with CosmosEX into it. (At the beginning of the video)
・Falcon 030+FPU 14mb CosmosEX・Atari MegaSTE 4Mb CosmosEX・Atari STe 4Mb GotekHxC+Satan・Amiga A600 Vampire V2・Amiga A1200 030/50・MIST・

User avatar
leech
Atari Super Hero
Atari Super Hero
Posts: 851
Joined: Tue Dec 01, 2015 3:26 pm

Re: New transparent CosmosEx case for 3D printing

Postby leech » Tue Apr 11, 2017 5:52 pm

Nice! My thought was to keep the floppy drive in there (For those times when I need my old stuff) and to put the CosmosEX into the hard drive bay. The power switch needs to be moved though for that to happen, so one of these days when I get some time, I'll work on that and see what I can pull off.
Atari 8Bits: 800xl, 600xl, XEGS, 800, 130xe, 130xe (fully upgraded (soon!))
Atari STs: 1040STf (broken shifter), 1040STe, Mega STe, TT030, Falcon (CT60e, SuperVidel)

User avatar
Estrayk
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 142
Joined: Mon Nov 23, 2015 2:52 pm
Location: Spain

Re: New transparent CosmosEx case for 3D printing

Postby Estrayk » Tue Apr 11, 2017 5:59 pm

leech wrote:Nice! My thought was to keep the floppy drive in there (For those times when I need my old stuff) and to put the CosmosEX into the hard drive bay. The power switch needs to be moved though for that to happen, so one of these days when I get some time, I'll work on that and see what I can pull off.


Ok but.... The CosmosEX can emulate the Diskdrive using .ST images. convert all your disk to .ST and thas all. :cheers:
・Falcon 030+FPU 14mb CosmosEX・Atari MegaSTE 4Mb CosmosEX・Atari STe 4Mb GotekHxC+Satan・Amiga A600 Vampire V2・Amiga A1200 030/50・MIST・

User avatar
leech
Atari Super Hero
Atari Super Hero
Posts: 851
Joined: Tue Dec 01, 2015 3:26 pm

Re: New transparent CosmosEx case for 3D printing

Postby leech » Wed Apr 12, 2017 12:08 am

Yes, but if you have documents saved to floppy, you wouldn't be able to read them, right? So i was going to set the main floppy to B, the CosmosEX to A, and then I believe you can pass through Wifi for network and use it as a virtual hard disk. Best of all worlds.
Atari 8Bits: 800xl, 600xl, XEGS, 800, 130xe, 130xe (fully upgraded (soon!))
Atari STs: 1040STf (broken shifter), 1040STe, Mega STe, TT030, Falcon (CT60e, SuperVidel)

Sowden
Atari nerd
Atari nerd
Posts: 49
Joined: Mon Mar 17, 2014 6:15 pm

Re: New transparent CosmosEx case for 3D printing

Postby Sowden » Mon May 01, 2017 7:36 pm

Ahhh, so here is an interesting question for Jookie. I have the first version of the CosmosEx, using Pi version Model B. With this latest revision it is using Model B+ and adding on two more USB ports, which would be handy. Could I take out the boards in my original case, print this cool case out, buy a B+ and plug it in, should it work the same as your latest revisions? Thanks.


Social Media

     

Return to “CosmosEx”

Who is online

Users browsing this forum: No registered users and 3 guests