Search found 185 matches

by samf
Wed Jan 30, 2008 1:01 am
Forum: CT60 / CT63 Area
Topic: Out of Frequency Range
Replies: 3
Views: 1236

Out of Frequency Range

Hi All,

Finally able to start my CT60/Falcon after over a year, and that's the message I've gotten on 2 different vga monitors!! :x :x

I don't understand. What would cause that, and how do I resolve it?!?!?!?!? :?

Thanks and have a great day one and all!! :cheers:
by samf
Sun Jan 27, 2008 2:17 pm
Forum: CT60 / CT63 Area
Topic: Falcon Will Not Start
Replies: 5
Views: 1940

Re: Falcon Will Not Start

stimpy wrote:Have you got the power switch connected to the right CT60 pins?



I have the power supply attached to the ct60, and the hard drive. I turn on the power by the on/off switch on the back of the power supply unit. Nothing.

I don't have any wires from the case attaching to the ct60.
by samf
Sun Jan 27, 2008 2:41 am
Forum: CT60 / CT63 Area
Topic: Falcon Will Not Start
Replies: 5
Views: 1940

Re: Falcon Will Not Start

Well, calming down after the panic, I realized when I turn on the psu, nothing happens, it doesn't turn on, the case fan does one wiggle and nothing after that. I think the power supply crapped out!!

Do you all agree with my assesment, or am I way off?

Thanks!
by samf
Sun Jan 27, 2008 12:52 am
Forum: CT60 / CT63 Area
Topic: Falcon Will Not Start
Replies: 5
Views: 1940

Falcon Will Not Start

Aaaaccckkkkk!!!!! Finally put my Falcon back together after six months.....now it will not power up!!!!!! It's got a CT60, wired, and I think I've got all the cables connected correctly, but now the Falcon will not power up at all. :cry: Also, what's a good heatsink/fan combo for the motorla cpu? Th...
by samf
Sat Jan 26, 2008 5:17 pm
Forum: Website Discussions
Topic: Logo Competition
Replies: 66
Views: 13717

Re: Logo Competition

darklight wrote:Here is an offering. I wish I was more imaginative :oops:



DarkLight,

Personally, I think that's a great logo!! :D
by samf
Thu Jan 24, 2008 12:12 am
Forum: Professionals
Topic: Falcon Ports
Replies: 14
Views: 2086

Re: Falcon Ports

What can you use the dsp port for? Interfacing directly with the DSP chip. Steinberg made a couple of interfaces for it. One that gives 8 Channel outputs and also a digital interface. So, in other words, unless I'm into making, editing, or whatever, music, then I'm not concern myself with it.....th...
by samf
Wed Jan 23, 2008 7:48 pm
Forum: Games - Compatibility Issues etc.
Topic: Time Bandit
Replies: 32
Views: 29273

Re: Time Bandit

Will those later versions work on a Falcon straight out of the box? I have Time Bandit, but I haven't had time (no pun intended :twisted: ) to try it on my Falcon with Backward 3. Just checked my Falcon compatibility spread sheet. Both Time Bandit v0.96 and v2.0 run on my Falcon030 (fast!), and you...
by samf
Wed Jan 23, 2008 7:43 pm
Forum: Professionals
Topic: Falcon Ports
Replies: 14
Views: 2086

Re: Falcon Ports

Maybe something like this I found plenty of hits using google. Just search on DBXX (fe)male ribbon connector For sure the easiest way of making those extenders, and you will get the length you want since you can measure, cut & squeeze them together in less than 30 sec. :) So basically the port ...
by samf
Wed Jan 23, 2008 5:00 pm
Forum: Professionals
Topic: Falcon Ports
Replies: 14
Views: 2086

Re: Falcon Ports

I need the following port extenders: 1 Enhanced Joystick Port 1 Paralled Printer Port 1 Serial Port 1 DSP Port 1 Falcon to VGA Port 1 MegaST Keyboard Adapter (apprx. 12" long so I can take it out to the back plane) Most of these extenders you can make yourself, without soldering! Most d-sub co...
by samf
Wed Jan 23, 2008 3:53 pm
Forum: Games - Compatibility Issues etc.
Topic: Time Bandit
Replies: 32
Views: 29273

Re: Time Bandit

Somewhere there was a trained version of Time Bandit, but that only works with early TOS IIRC. Do you have this version, Symoon? I only know about an invincibilty-cheat, which can be found on Floppyshop Uitility Disk 3993. Well, there's a disk patching an original disk I think, but the version I wa...
by samf
Wed Jan 23, 2008 3:44 pm
Forum: Applications
Topic: What can I do with these ST disks?
Replies: 8
Views: 2991

Re: What can I do with these ST disks?

I don't know if it's the correct place to write this, sorry if it isn't. I'm just wondering : I've got back tons of ST disks and I wonder if these may be useful for some people or not. There are some I really don't know what they are and if they're original (in the "Others" section below)...
by samf
Wed Jan 23, 2008 3:41 pm
Forum: Professionals
Topic: Falcon Ports
Replies: 14
Views: 2086

Re: Falcon Ports

I'm in bit of a bind. I've recased my Falcon in a big tower case, but now I need to extend all the ports except for 1 enhanced joystic port, the headphone/mic ports, cartridge port, or midi ports. I might be able to help you out on some of these extenders, depending on how long you need them to be....
by samf
Wed Jan 23, 2008 1:46 pm
Forum: Professionals
Topic: Falcon Ports
Replies: 14
Views: 2086

Re: Falcon Ports

Not really too much work if you have a soldering iron? The problem will be sourcing some of the connectors, specifically the DSP and monitor ones. The 15-pin E-Joystick connector is the same as a VGA one. As for cabling, get yourself some multi core - or if you're more of a resourceful person, hack...
by samf
Wed Jan 23, 2008 2:16 am
Forum: Professionals
Topic: Falcon Ports
Replies: 14
Views: 2086

Falcon Ports

Hi All, I'm in bit of a bind. I've recased my Falcon in a big tower case, but now I need to extend all the ports except for 1 enhanced joystic port, the headphone/mic ports, cartridge port, or midi ports. I need the following port extenders: 1 Enhanced Joystick Port 1 Paralled Printer Port 1 Serial ...
by samf
Tue Jan 22, 2008 8:52 pm
Forum: Website Discussions
Topic: FTP sites currently working
Replies: 28
Views: 12051

Re: ftp://keilis-atari.dyndns.org/

keili wrote:Anonymous login should always be possible until the user limit has been reached. I will check it this afternoon.


So what is the anonymous login?

id: anonymous
password: what is it?

Thanks
by samf
Sat Jan 19, 2008 5:28 pm
Forum: Applications
Topic: Jinee2.5
Replies: 9
Views: 2032

Re: Jinee2.5

Well, I guess I'm sol as far as aquiring Jinnee2.5. :(

Thanks for the input folks....I think I'll go to the corner now, assume the fetal position and cry (sigh). :cry: :cry:
by samf
Fri Jan 18, 2008 2:24 pm
Forum: Applications
Topic: Jinee2.5
Replies: 9
Views: 2032

Jinee2.5

Hello All !!

Where can one purchase Jinnee2.5 via PayPal?

Thanks!
by samf
Wed Dec 19, 2007 2:55 am
Forum: Applications
Topic: Thats Write
Replies: 4
Views: 1925

Re: Thats Write 4

Pastor wrote:Thanks Dal_1978 for your reply. I downloaded Thats Write 4 and it looks good only available in German with no rsc files that I could find. Anyone have a translated version of the programme.


Where did you find TW4?

Thanks
by samf
Thu Oct 25, 2007 11:38 am
Forum: Professionals
Topic: DHS
Replies: 9
Views: 2681

DHS

frost wrote:read li instead of the u.


You are absolutely right!! It worked!

I don't know why I didn't see it that way....embarrassing to say the least! :oops: :oops:

Thanks!
by samf
Wed Oct 24, 2007 12:42 pm
Forum: Professionals
Topic: DHS
Replies: 9
Views: 2681

DHS

frost wrote:Just read the ascii art under the form :wink:


That's the problem....I read it as fupo.....but that doesn't work. I have no clue as to what else it may be.

Thanks for your suggestion though! :)
by samf
Wed Oct 24, 2007 12:06 pm
Forum: Professionals
Topic: DHS
Replies: 9
Views: 2681

DHS

Anyone here also read the Falcon(ct60) forum?
I absolutely cannot make out the Human Verification...everything I've tried is rejected!
:evil:

If you know what it is, please email me. :roll:

Thanks! :o
by samf
Sat Oct 20, 2007 11:02 pm
Forum: Professionals
Topic: EtherNat
Replies: 1
Views: 952

EtherNat

Hi All, Question: Has anyone received their ethernat yet? If so, what are your opinions on it? How well is the network portion of it working? How will are the usb ports working? What usb devices have you been able to use with little or no problems? Thanks, and congrats to those who have their ethern...
by samf
Sun Sep 09, 2007 1:29 am
Forum: Professionals
Topic: Falcon moved to big tower case
Replies: 7
Views: 2368

Falcon moved to big tower case

Exactly what connectors do you need? Or you want them all? Which ones have you already done? I want all of them except for the midi and cartridge ports...I have no intention of using those ports at all. If you have any more questions or would like to get in touch, just email me. Thanks Greenious
by samf
Tue Jul 10, 2007 12:45 pm
Forum: News & Announcements
Topic: [ANN] CDLab 0.92 released
Replies: 5
Views: 2722

CDLab 0.92 released

Does the fact that a scsi driver interface is needed mean that the cd burner itself must be a scsi drive?

Thanks
by samf
Fri Jun 08, 2007 6:37 pm
Forum: Professionals
Topic: IDE Splitter?
Replies: 15
Views: 4964

IDE Splitter?

So a Falcon can't have 2 IDE devices attached internally without modification?? E.g. replace standard cable with cable allowing 2 devices to be connected such as in some modern laptops (same as standard 3.5 inch IDE cable in PC's but 2.5 inch instead). Yes, a Falcon can have two internal ide device...

Go to advanced search