Search found 365 matches

by KLund1
Thu Nov 16, 2017 10:44 pm
Forum: Hardware
Topic: Megafile 30 configuration
Replies: 8
Views: 346

Re: Megafile 30 configuration

After your D and E showing, select save desktop under the options menu. This updates the .inf file
by KLund1
Wed Nov 15, 2017 8:38 pm
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

Thanks! I have tested resistance on traces as shown on the schematics as best I could all seemed ok. I did find that a wire had come loose from the upgrade previously done. It was on the piggyback IC from pin 2 to 15. See post 4, above for a pic. I do not know how long it was disconnected , or if it...
by KLund1
Sat Nov 04, 2017 8:12 pm
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

Ok, Back to testing this Falcon. I have pulled out the VMRam chip. I used Tech Cleaner to clean out the reset switch as suggest above. But I do not know how to test it. Can I do it with a mutimeter? I did power it up after I 'cleaned' the reset switch. I still get a black screen. I tested with both ...
by KLund1
Thu Sep 28, 2017 9:52 pm
Forum: Applications
Topic: Microware OS-9 O/S for Atari ST
Replies: 27
Views: 10005

Re: Microware OS-9 O/S for Atari ST

Wow this is very cool!!
I'd love to tr to run this on the Falcon!
Any updates!! Please!
by KLund1
Thu Sep 28, 2017 9:36 pm
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

I have ask him for loans in the past, and he wants collateral. He wanted my 1450xld and falcon to barrow his only Atari PC1 manual so I could make copies. That is a bit steep for me. I have been busy this week at home, and am out of town this weekend, so it will be a few days before I can get back t...
by KLund1
Wed Sep 27, 2017 10:54 pm
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

I got the badge from Best. He had 5 left and left me choose the one I liked best. I work only a few blocks away from him. The others were very pastel in colors.

I will test the reset switch. It looks like it has had a lot of use.
by KLund1
Wed Sep 27, 2017 6:34 am
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

Mikro, Lonny's dev-docs archive (look for Service Guide) Can't find. I probably should have, but I have not heard of this. Can you post a link? And here are a few pics of my good Falcon. Sorry for the bad pic quality. Also got a exxos psu in there. It really make a noticeable difference. Highly reco...
by KLund1
Wed Sep 27, 2017 2:34 am
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

Yes live and learn, but possibly expensive lesson. Pulling Dallas tonight, and will try booting without it. I hope it boots. I will then put in a socket. Found Schematics, but they are hard to read. Also I am not at all good at reading them anyway. I pretty sure this is it, by looking on the MB and ...
by KLund1
Tue Sep 26, 2017 4:39 am
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

Ya I'm a dope!! When I do something like this I think it will always work,'it's so simple' is in my mind. I do not think long term, like what happens if it dose not work.... I think 'It worked last time, so it will work this time'... Lesson now learned about sockets!! And I have so many sockets arou...
by KLund1
Tue Sep 26, 2017 3:02 am
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

Thanks everyone for those great suggestions! Here are the results: SM124 is no joy. dark screen. no response. Nothing, not even blips on screen on power up I swapped out the 14mb upgrade to the other known working 14mb upgrade from the other falcon I have. Nothing. I do not have a oem 4mb board. I r...
by KLund1
Mon Sep 25, 2017 12:38 am
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Re: Falcon NO display after NVRam replacement

wongck, that key combination did not work. Mikro, I'd rather not pull the dallas out just yet. Last resort, that will be. My soldering is ok, not PRO. But I checked with a magnifying glass and did not see any shorts from solder. I wiped with a IBA, and toothbrush. Could the Dallas be incompatible wi...
by KLund1
Sun Sep 24, 2017 10:22 pm
Forum: Hardware
Topic: Falcon NO display after NVRam replacement
Replies: 31
Views: 1445

Falcon NO display after NVRam replacement

Hi all! I have a Falcon that I replaced the original NVram/RTC with a Dallas IC. I did the same thing a few months ago on another falcon with no problems. I got both dallas IC's at the same time a couple years ago. This current falcon booted before the upgrade. Now when I boot a get a message on my ...
by KLund1
Tue Sep 19, 2017 10:01 pm
Forum: Hardware
Topic: Magafile Upgrade parts suggestions??
Replies: 2
Views: 224

Re: Magafile Upgrade parts suggestions??

So could I just use a SCSI drive, and skip the scsi-mfm? if so, what drive models would be suggested.
by KLund1
Mon Sep 18, 2017 8:30 pm
Forum: Hardware
Topic: Magafile Upgrade parts suggestions??
Replies: 2
Views: 224

Magafile Upgrade parts suggestions??

I have a MF30 with a dead drive. I have a working unit I tested with. So I know that Atari parts are working. I'd like to kind of stay retro with a spinning drive. But do not want to overdraw the hobby bank. I have read that there are 'host adapters' that might work with IDE drives. But I'm not quit...
by KLund1
Mon Sep 18, 2017 8:10 pm
Forum: Hardware
Topic: Magafile Upgrade parts suggestions??
Replies: 0
Views: 165

Magafile Upgrade parts suggestions??

I have a MF30 with a dead drive. I have a working unit I tested with. So I know that Atari parts are working. I'd like to kind of stay retro with a spinning drive. But do not want to overdraw the hobby bank. I have read that there are 'host adapters' that might work with IDE drives. But I'm not quit...
by KLund1
Sat Sep 09, 2017 7:20 am
Forum: Hardware
Topic: RETRO-BRITE...Best Process So Far
Replies: 9
Views: 786

Re: RETRO-BRITE...Best Process So Far

tuf, Great, it will work. NOTE: I do NOT use cling wrap. I highly suggest that you never use it! That is the major problem people are doing. It is one of the main reasons for the 'blotching' Give my method a try. I can almost guarantee that it will work if followed properly. Just put on an even coat...
by KLund1
Fri Sep 08, 2017 6:17 pm
Forum: Hardware
Topic: RETRO-BRITE...Best Process So Far
Replies: 9
Views: 786

Re: RETRO-BRITE...Best Process So Far

Here in California, USA, it is very difficult to get large qty of hydrogen peroxide in liquid form in that high a percentage. I think you need a license, and work at business that needs it. All we have at retail is 3% in 12oz bottles in the first aid section of a store. I think things are different ...
by KLund1
Fri Sep 08, 2017 10:00 am
Forum: Gallery
Topic: My Atari STE has had the Retrobright Treatment
Replies: 31
Views: 9305

Re: My Atari STE has had the Retrobright Treatment

ozone is very slow, imo. My process works a bit faster, with more controlled results. And it is cheaper. If you have an Ozone generator please to a comparison. But I'll bet I can do about 150 cases for the cost of OZ generator.
by KLund1
Fri Sep 08, 2017 9:40 am
Forum: Hardware
Topic: Falcon IDE Ribbon Cable 40/80?
Replies: 3
Views: 310

Re: Falcon IDE Ribbon Cable 40/80?

44 wire? not 40?
I must be loosing my head
Are you taking about the cable this like the one for floppy drives but a bit wider. same decimeter wires in the ribbon?
Thanks
by KLund1
Fri Sep 08, 2017 5:07 am
Forum: Hardware
Topic: Falcon IDE Ribbon Cable 40/80?
Replies: 3
Views: 310

Falcon IDE Ribbon Cable 40/80?

Which ribbon cable is best, the 40 or 80(ultra) wire version? or dose it make no difference?
Updating a Falcon to CF and SD, just want to check?
by KLund1
Fri Sep 08, 2017 4:39 am
Forum: Hardware
Topic: RETRO-BRITE...Best Process So Far
Replies: 9
Views: 786

RETRO-BRITE...Best Process So Far

I think figured it all out. I've been doing a lot of Retro-Brite on ST's, and many other cases this way. The all come out perfect! Here is what seems to work best and why. Please read all the way through. Get something called 'Developer' from a beauty supply store. The clerk/cashier/associate/sales-...
by KLund1
Fri Sep 08, 2017 4:12 am
Forum: Gallery
Topic: My Atari STE has had the Retrobright Treatment
Replies: 31
Views: 9305

Re: My Atari STE has had the Retrobright Treatment

I figured it all out. I've been doing a lot of Retro-Brite on ST's and many other cases. The all come out perfect. Here is what seems to work best and why. Get something called 'Developer' from a beauty supply store. They come in many sizes and strengths. I suggest 30 strength. Next, get a clear pla...
by KLund1
Tue Sep 05, 2017 10:08 am
Forum: Hardware
Topic: Best General Use Bug Free TOS Version?
Replies: 4
Views: 350

Best General Use Bug Free TOS Version?

The topics says it all. But, there is always a But, sorry! Criteria: Any ST to MSTE, Falcon/TT preferred, but unlikely. Will run just about everything. Games at correct speed to applications/utilities that need all the speed available. GEM/TOS/GDOS compatible without any known bugs. I know there are...
by KLund1
Tue Sep 05, 2017 9:36 am
Forum: Applications
Topic: Geneva
Replies: 204
Views: 47364

Re: Geneva

WOW! A Lot of interest in this!!
Great for a interesting piece of code.
Has anyone installed this original software with Neodesk 4 on a generic 14mb Falcon?
by KLund1
Tue Sep 05, 2017 9:29 am
Forum: Demos - General
Topic: Donations
Replies: 64
Views: 242850

Re: Donations

Paid up for this year!

Go to advanced search