Search found 412 matches

by Arne
Tue Jan 16, 2018 9:11 am
Forum: Hades / Milan
Topic: Milan maximum RAM
Replies: 8
Views: 291

Re: Milan maximum RAM

I remember having a TT-RAM-card in my TT where I would have to manually add jumpers to these pins as the SIMMs I had left all these pins floating even though they were 32Mb SIMMs. Might that be an aixTT? MagnumTT has additional jumpers/pull-ups in case the PD pins are not set (correctly). I guess t...
by Arne
Mon Jan 15, 2018 9:16 am
Forum: Chat forum [ENG]
Topic: Surviving STs
Replies: 22
Views: 702

Re: Surviving STs

LaceySnr wrote:To be fair, Atari030 does have some things I'd generally file under "unobtainium" ;)


Eagle, Medusa, Milan... :?:
by Arne
Fri Jan 12, 2018 4:50 am
Forum: Hardware
Topic: I borked my 520ST Help?!?
Replies: 13
Views: 537

Re: I borked my 520ST Help?!?

"T0 MFP Timer" Service Manual says that's a problem with the MFP timer(s). Or is protocol here to just remove/replace the 68901 MFP? NO. Protocol is to find the error. Take a scope, the schematics and check the clocks(2.xMHz and 4MHz), the /CS line and see if /DTACK is activated shortly a...
by Arne
Mon Jan 08, 2018 6:00 pm
Forum: Hardware
Topic: I borked my 520ST Help?!?
Replies: 13
Views: 537

Re: I borked my 520ST Help?!?

Blur2040 wrote:For whatever reason, and despite that my 1040 ST works just fine, I've gone ahead and reached out to Best electronics to get a diagnostic cart.

Still have some available in my shop.
by Arne
Sun Jan 07, 2018 9:57 am
Forum: Hardware
Topic: Where to find replacement cartridge connectors?
Replies: 9
Views: 483

Re: Where to find replacement cartridge connectors?

joska wrote:Thanks, I will try that.


You've been able to source these?
by Arne
Sat Jan 06, 2018 7:22 am
Forum: 680x0
Topic: How NOT to set supervisor mode!
Replies: 11
Views: 486

Re: How NOT to set supervisor mode!

I am afraid that ⋅  your "solution" is not a solution at all as it leaves garbage on the stack ⋅  your "solution" just hides the real problem somewhere outside the code snippet you provided The Atari Profibuch shows this snippet: pea stack move.w #32,-(sp) tra...
by Arne
Thu Jan 04, 2018 3:40 pm
Forum: Professionals
Topic: GE Soft Eagle (TT clone)
Replies: 7
Views: 950

Re: GE Soft Eagle (TT clone)

Sorry, Fredi was not involved in the Eagle. He made the contemporary Medusa. My mistake. Gero Anschütz was the main developer. What add-on cards do you have? CPU/FPU, RAM, EagleChannel-to-VME, Triple-VME-Slot Backplane. For attaching a VME GFX card I do have a CrazyDots and a Nova VME-to-ISA adapte...
by Arne
Thu Jan 04, 2018 3:29 am
Forum: Professionals
Topic: GE Soft Eagle (TT clone)
Replies: 7
Views: 950

Re: GE Soft Eagle (TT clone)

Very few of these were sold I believe. 50 IIRC Have you tried to contact Fredi? Why him? As the Eagle mainboard holds a ROM port interface as a 40pin connector (same as IDE) I do have some hope to connect a diagnostic kit for TT and route the I/O through null-modem cable. I still have a 40pin to At...
by Arne
Wed Jan 03, 2018 6:55 pm
Forum: Professionals
Topic: GE Soft Eagle (TT clone)
Replies: 7
Views: 950

Re: GE Soft Eagle (TT clone)

One in a PC housing, one in parts and a single mainboard.
by Arne
Wed Jan 03, 2018 4:39 pm
Forum: Professionals
Topic: GE Soft Eagle (TT clone)
Replies: 7
Views: 950

GE Soft Eagle (TT clone)

Anyone with a working Eagle around here? Have some questions.
by Arne
Wed Jan 03, 2018 4:35 pm
Forum: Professionals
Topic: 14mb board (various docs, pinout, ctr14 gerber files)
Replies: 84
Views: 45747

Re: 14mb board (various docs, pinout, ctr14 gerber files)

I have been manufacturing a new batch of 14MB RAM expansions. Available in my shop.
by Arne
Wed Dec 27, 2017 5:41 pm
Forum: Chat forum [ENG]
Topic: Atari in films
Replies: 55
Views: 13784

Re: Atari in films

The movie "23: nothing is what it seems" (https://en.wikipedia.org/wiki/23_%28film%29) contains a very short scene with a 1040:
Image
It's about a German hacker (Karl Koch).
by Arne
Sat Nov 04, 2017 8:24 am
Forum: Coding
Topic: GFABasic or STOS or other?
Replies: 15
Views: 999

Re: GFABasic or STOS or other?

i would say on the ST, and if you have to learn a new language, why not Assembler, it is not much harder, a little more work but you also get a good speed increase Ouch... 8O You really want to throw a poor gal with BASIC background into the ASM tar-pit? IMHO ASM development takes much longer than ...
by Arne
Sat Nov 04, 2017 6:58 am
Forum: Coding
Topic: GFABasic or STOS or other?
Replies: 15
Views: 999

Re: GFABasic or STOS or other?

To some degree I would say: Depends on what you want to do . I started with CBM BASIC, later GfA Basic. Was nice. One day I wanted to compile my GfA program that was running fine in the interpreter. It compiled without errors but when I double clicked the compiled PRG it bombed out. That day I dropp...
by Arne
Mon Oct 30, 2017 3:00 pm
Forum: Hardware
Topic: Atari ST HELP PLz
Replies: 2
Views: 316

Re: Atari ST HELP PLz

The board has 4 memory chip that can be removed These are 514256? 256KBit x4 x4 = 256KBit x16 = 512KByte. is it possible to change the 4 memory chip to higher memory capacity? Well, in general: yes. But these DRAMs in DIL package are as rare as a unicorn. In 30 years I haven't seen one myself. But ...
by Arne
Wed Oct 04, 2017 8:57 am
Forum: Hardware
Topic: 1040 STFM no floppy icons / Desktop appears immediately
Replies: 4
Views: 470

Re: 1040 STFM no floppy icons / Desktop appears immediately

Then I suggest to measure the DS0 line. There is just an inductor between PSG's DS0 out and the ribbon cable. I have seen defective inductors, but not in signal lines. A multimeter should be fast enough for this purpose.
Have you checked the swapped parts in another ST that they run correctly?
by Arne
Wed Oct 04, 2017 7:00 am
Forum: Hardware
Topic: 1040 STFM no floppy icons / Desktop appears immediately
Replies: 4
Views: 470

Re: 1040 STFM no floppy icons / Desktop appears immediately

Get schematics, and check DriveSelect0 and SideSelect coming from the PSG.
Your drive is jumpered for Drive0?
You use TOS 1.0x?
by Arne
Sun Jun 18, 2017 8:06 am
Forum: Applications
Topic: Scooter-PCB to Gerber?
Replies: 2
Views: 693

Re: Scooter-PCB to Gerber?

There is either a plotter or printer driver PRG included. But be aware: ScooterPCB (Atari) macro's drill holes are probably NOT correct (confirmed by Mr.Kahlert). Second: ScooterPCB (Atari) can only plot RS-274-D. This is obsolete and almost no PCB manufacturer accepts it! Use the Windows version of...
by Arne
Thu May 25, 2017 1:43 pm
Forum: C / PASCAL etc.
Topic: TOS compliant reboot from C
Replies: 6
Views: 1767

Re: TOS compliant reboot from C

typedef void (*tFunction)(void); static const kWarmStartAddress_U32 = 0xE00000ul; tFunction JumpToTOS; uint32_t myJumpAddress_U32; myJumpAddress_U32 = (*(volatile uint32_t*) (kWarmStartAddress_U32 + sizeof(uint32_t))); /* slot #0 is occupied by SSP */ JumpToTOS = (tFunction) myJumpAddress_U32; Jump...
by Arne
Wed May 17, 2017 8:45 am
Forum: Hardware
Topic: 1040STFM Halted CPU
Replies: 30
Views: 3902

Re: 1040STFM Halted CPU

TeX38 wrote:Are these parts interchangeable between the 520 and 1040 systems?

In general: yes, all ST chipsets (260,520,1040,MegaST, STacey) are interchangeable. IIRC there do exist 80pin SMD MMU and/or Glue. But these are soldered to the PCB.
But better do not mix IMP and non-IMP manufactured ASICs.
by Arne
Thu May 11, 2017 4:26 am
Forum: Hardware
Topic: Atari TT boots to desktop but black screen with diagnostic cartridge plugged in
Replies: 7
Views: 1409

Re: Atari TT boots to desktop but black screen with diagnostic cartridge plugged in

If you've got a 2MB ST-RAM card added then remove it and try again with the diag cart. Your TT might have the cartridge port fuse burned. If this is the case when you plug the cartridge it pulls all lines to LOW and would probably give you the black screen you see. Anyway: I've seen the inductor nex...
by Arne
Mon May 08, 2017 4:59 am
Forum: Professionals
Topic: TT Fast ram compatibility?
Replies: 7
Views: 1332

Re: TT Fast ram compatibility?

But you can enable or disable nibble/burst mode with a jumper. In fact nibble/burst mode doesn't even work with my stock 4x1mb dimms. That's true. Is your card a 4MB card that is capable of taking four 4MB SIMMs (CA401058) or is it a 4MB-only card (CA400312)? You can upgrade a CA400312 board to 16M...
by Arne
Sun Apr 30, 2017 4:33 am
Forum: Hardware
Topic: Atari STF Modulator
Replies: 4
Views: 807

Re: Atari STF Modulator

/HALT is bidirectional.
by Arne
Sat Apr 29, 2017 10:57 am
Forum: Hardware
Topic: Atari STF Modulator
Replies: 4
Views: 807

Re: Atari STF Modulator

Grab the Service Manual, read the chapter "Troubleshooting a dead unit" and then check /HALT, /RESET and /BERR.

Go to advanced search